Compose Ci3 W130-S3 - Loudspeaker Helix - Free user manual and instructions
Find the device manual for free Compose Ci3 W130-S3 Helix in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2-way component speaker system |
| Brand | Helix |
| Model | Compose Ci3 W130-S3 |
| Woofer Size | 130 mm (5.25") |
| Tweeter Size | 25 mm (1") soft dome |
| Power Handling (RMS) | 60 Watts |
| Power Handling (Max) | 120 Watts |
| Impedance | 4 Ohms |
| Sensitivity | 90 dB (1W/1m) |
| Frequency Response | 45 Hz - 30 kHz |
| Crossover Frequency | 3.2 kHz |
| Crossover Type | External crossover network |
| Mounting Depth | 45 mm (1.77") |
| Cutout Diameter | 120 mm (4.72") |
| Total Weight (Set) | 2.5 kg |
| Cone Material | Polypropylene |
| Tweeter Magnet | Neodymium |
| Installation | Car audio front or rear components |
| Included Accessories | Crossover, grilles, mounting hardware |
| Maintenance | Clean with dry cloth, avoid moisture |
| Safety | Professional installation recommended |
| Repairability | Spare parts available via Helix dealers |
Frequently Asked Questions - Compose Ci3 W130-S3 Helix
What is the power handling of the Helix Compose Ci3 W130-S3?
The speaker system has a RMS power handling of 60 Watts and a maximum power handling of 120 Watts. It is important to match the amplifier output to avoid distortion and potential damage.
What is the impedance rating of these speakers?
The impedance is 4 Ohms, which is the standard for most car audio amplifiers. Ensure your amplifier is stable at 4 Ohms for optimal performance.
Can I install these speakers in my car doors?
Yes, the Compose Ci3 W130-S3 is designed for door mounting in most vehicles. The mounting depth is 45 mm, and the cutout diameter is 120 mm. Always check clearance and use proper spacers or adapters if needed.
What is the recommended amplifier power for this system?
We recommend using an amplifier that delivers 30 to 60 Watts RMS per channel. A higher power RMS with a clean signal is better than a lower power amplifier driven into clipping.
How do I connect the crossover included with the speakers?
Connect the amplifier output to the input terminals of the crossover. Then connect the woofer and tweeter to the respective output terminals labeled 'Woofer' and 'Tweeter'. Ensure proper polarity (+/-) for correct phase.
How should I clean and maintain these speakers?
Wipe the speaker surfaces with a soft, dry cloth. Avoid using water or cleaning agents, as moisture can damage the cones, surrounds, and crossover circuitry.
What is the frequency response of the Compose Ci3 W130-S3?
The frequency response is 45 Hz to 30 kHz. This ensures deep bass for a 5.25-inch woofer and crisp highs from the soft dome tweeter.
Are the speakers waterproof or weatherproof?
No, these speakers are not waterproof. They are designed for indoor or vehicle cabin installation. Do not expose them to rain, splashes, or excessive humidity.
Do the speakers come with grilles?
Yes, the set includes protective grilles for both the woofer and tweeter. These grilles help shield the drivers from physical damage while allowing air flow.
What is the mounting depth and cutout size?
The mounting depth of the woofer is 45 mm (1.77 inches) and the cutout diameter is 120 mm (4.72 inches). Always verify your vehicle's mounting depth and hole size before installation.
User questions about Compose Ci3 W130-S3 Helix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Compose Ci3 W130-S3 - Helix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Compose Ci3 W130-S3 by Helix.
USER MANUAL Compose Ci3 W130-S3 Helix
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Helix
Model : Compose Ci3 W130-S3
Category : Loudspeaker