XTEND-PAIR40 - AV extender DVDO - Free user manual and instructions
Find the device manual for free XTEND-PAIR40 DVDO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | AV extender kit (transmitter + receiver) |
| Brand | DVDO |
| Model | XTEND-PAIR40 |
| Transmission distance | Up to 40m at 4K resolution, up to 70m at 1080p over a single Cat5e/6/7 cable |
| Supported video resolutions | 4K UHD 60Hz (4:4:4), 1080p, 1080i, 720p, and standard resolutions |
| HDCP support | HDCP 2.2 and 1.4 compliant |
| Video input/output | HDMI via Type A female ports on both ends |
| Audio support | Pass-through for LPCM 7.1, Dolby TrueHD, DTS-HD Master Audio |
| Control extension | IR pass-through (20-60kHz) on dedicated 3.5mm jacks; optional RS-232 via adapter |
| Power supply | Two 24V DC power adapters included (one for each unit) |
| Power consumption | ≤ 5W per unit |
| Dimensions (each unit) | 105mm (W) x 62mm (D) x 20mm (H) |
| Weight (each unit) | 250g |
| Housing | Brushed aluminum case for heat dissipation |
| Operating temperature | 0°C to 40°C |
| Mounting | Dual mounting brackets for both transmitter and receiver included |
| Cable requirements | Shielded or unshielded Cat5e/6/7 with RJ45 connectors (not included) |
| Warranty | 2-year limited warranty |
| Product family | Extenders for professional AV and home theater installations |
| Maintenance | Wipe the exterior with a soft, dry cloth; avoid liquids and abrasive cleaners |
| Repairability | No user-serviceable parts; contact DVDO support for advanced repairs |
Frequently Asked Questions - XTEND-PAIR40 DVDO
How do I connect the DVDO XTEND-PAIR40 extender?
Connect the source device (e.g., Blu-ray player) to the transmitter's HDMI input via an HDMI cable. Then run a single Cat5e/6/7 cable from the transmitter's RJ45 port to the receiver's RJ45 port. Finally, connect the display to the receiver's HDMI output. Power both units with the included 24V adapters.
Does the XTEND-PAIR40 support 4K video?
Yes, it supports 4K UHD 60Hz with 4:4:4 chroma subsampling up to 40 meters over Cat6/7 cable. For distances up to 70 meters, it automatically scales down to 1080p if needed.
What type of cable should I use between the transmitter and receiver?
Use a single run of Cat5e, Cat6, or Cat7 network cable with RJ45 connectors. For critical 4K installations, Cat6 or better is strongly recommended to ensure full bandwidth and stability.
Do both the transmitter and receiver need a power supply?
Yes, each unit requires its own 24V DC power adapter. The included power supplies ensure reliable signal processing; other adapters may not provide the required voltage or current.
How can I transmit IR remote control signals through the extender?
Connect an IR emitter (sold separately) to the receiver's IR output port and place it near the source device. Connect an IR receiver to the transmitter's IR input to collect signals from your remote. The system carries the IR signal both directions.
What do the LED indicators on the devices mean?
The power LED lights green when the unit is receiving power. The link LED turns green when a valid HDMI signal is detected and the cable link is established. Blinking link LED may indicate a faulty or overloaded cable.
Can I install the extenders inside a wall or behind a TV?
Yes, the compact metal housing is designed for mounting in tight spaces. Use the included mounting brackets to attach them to a wall or rack. Ensure adequate ventilation and avoid enclosing them in fully sealed cavities.
Is the XTEND-PAIR40 compatible with HDCP 2.2 sources?
Absolutely. It is HDCP 2.2 compliant, so it works with 4K streaming devices, Ultra HD Blu-ray players, and cable/satellite boxes that require HDCP 2.2 for protected content.
How do I update the firmware on the extender?
Firmware updates are not user-serviceable. The extender is a plug-and-play device with no IP interface. If you suspect a firmware issue, contact DVDO support for the latest update procedure or a replacement unit.
What is the maximum distance I can extend a 1080p signal?
For 1080p video, the maximum reliable distance is 70 meters (230 feet) over Cat6 or Cat7 cable. Using Cat5e may reduce the range by about 10-15 meters due to lower bandwidth.
User questions about XTEND-PAIR40 DVDO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your AV extender in PDF format for free! Find your manual XTEND-PAIR40 - DVDO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XTEND-PAIR40 by DVDO.
USER MANUAL XTEND-PAIR40 DVDO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DVDO
Model : XTEND-PAIR40
Category : AV extender