My Heat 200 - Heating Lasko - Free user manual and instructions
Find the device manual for free My Heat 200 Lasko in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Personal Ceramic Heater |
| Brand | Lasko |
| Model | My Heat 200 |
| Power Consumption | 200 Watts |
| Voltage / Frequency | 120V AC, 60Hz |
| Heating Element | Ceramic PTC |
| Fan Speed | Single speed, fan-forced |
| Controls | On/Off switch |
| Safety Features | Tip-over switch, overheat protection, cool-touch housing |
| Dimensions (H x W x D) | 7.5 x 5.5 x 4.5 inches |
| Weight | 1.5 lbs |
| Cord Length | 4 feet |
| Color / Finish | White with accent color |
| Warranty | 1-year limited |
| Manual | Free PDF download, 4 pages |
| Assembly Required | No |
Frequently Asked Questions - My Heat 200 Lasko
What is the Lasko My Heat 200?
The Lasko My Heat 200 is a compact ceramic space heater designed for personal use, providing quick, focused warmth.
How does the Lasko My Heat 200 operate?
It uses a ceramic heating element combined with a fan to blow warm air. Simply plug it into a 120V outlet and turn it on using the power switch.
What safety features does it have?
The heater includes a tip-over switch that automatically shuts it off if knocked over, and overheat protection to prevent overheating. The housing stays cool to the touch.
Is the Lasko My Heat 200 suitable for large rooms?
No, it is a personal heater meant for small spaces like a desk, bathroom counter, or under a desk. It is not designed to heat entire rooms.
Can I use it in a bathroom or near water?
It is not waterproof and should be kept away from water. Do not use it in wet areas like inside a shower or immediately next to a bathtub.
Does the Lasko My Heat 200 have a thermostat?
No, it has a simple on/off switch without adjustable thermostat or temperature control. It runs at a constant output until turned off.
How much electricity does it consume?
The heater consumes 200 watts on high, which is relatively low for a space heater. This makes it energy-efficient for spot heating.
How long is the power cord?
The power cord is approximately 4 feet long, suitable for close placement near an outlet.
Is the Lasko My Heat 200 noisy?
It produces a low fan noise while operating, which is typical for fan-forced heaters. It is quiet enough for use in bedrooms or offices.
How do I clean and maintain the heater?
Always unplug before cleaning. Wipe the exterior with a dry or slightly damp cloth. Do not immerse in water or use harsh chemicals. Keep the air intakes free of dust and debris.
User questions about My Heat 200 Lasko
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual My Heat 200 - Lasko and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. My Heat 200 by Lasko.
USER MANUAL My Heat 200 Lasko
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lasko
Model : My Heat 200
Category : Heating