CyberPower

PDU15SWHVIEC8FNET - Multiprise avec gestion réseau CyberPower - Free user manual and instructions

Find the device manual for free PDU15SWHVIEC8FNET CyberPower in PDF.

📄 28 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice CyberPower PDU15SWHVIEC8FNET - page 12
12 / 28
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Managed Switched PDU (Power Distribution Unit)
Brand CyberPower
Model PDU15SWHVIEC8FNET
Mounting 1U Rackmount
Input Connection IEC C20 Inlet
Output Connectors 8 x IEC C13
Rated Current 15A @ 120V
Maximum Power 1800W @ 120V
Switching Capability Individual outlet remote on/off control
Management Interface Ethernet, Web GUI, SNMP v1/v2/v3, CLI via Telnet/SSH
Monitoring Real-time voltage, current, kW, kWh, temperature and humidity (with optional sensor)
Alarm Features Threshold notifications via email, SNMP traps, or syslog
Dimensions (W x D x H) 17.2 x 5.9 x 1.75 in (438 x 150 x 44 mm)
Weight 5.1 lb (2.3 kg)
Power Cord 10 ft (3 m) NEMA 5-15P to IEC C20
Operating Temperature 0 to 40 °C (32 to 104 °F)
Safety Overload protection with circuit breaker, surge protection
Maintenance Wipe with dry cloth; keep vents unobstructed; inspect connections periodically
Spare Parts and Repairability Replaceable AC power cord; internal repairs only by qualified service personnel
Warranty 3-year limited

Frequently Asked Questions - PDU15SWHVIEC8FNET CyberPower

How do I connect the PDU to my network?
Connect an Ethernet cable from the PDU's network port to your router or switch. Use the DHCP or static IP configuration via the command line or web interface to access the device.
Can I control each outlet individually?
Yes, through the web interface, SNMP, or CLI, you can remotely turn on, off, or reboot each outlet independently.
What is the maximum load I can connect?
The PDU is rated at 15A on 120V, which equals 1800W. Do not exceed this limit to avoid overload.
How do I update the firmware?
Download the latest firmware from the CyberPower support website. Access the PDU's web administrator page, go to the firmware update section, and upload the file.
Does it have surge protection?
Yes, the PDU includes surge protection and an overload circuit breaker to safeguard connected equipment.
How do I reset the PDU to factory defaults?
Use the reset button on the rear panel or issue the factory default command via the CLI. This will restore all settings to original values.
What monitoring data is available?
The PDU provides real-time data on voltage, current, power, energy consumption, and optionally temperature and humidity with a compatible sensor.
Can I set up email notifications for alarms?
Yes, when configured with SMTP settings, the PDU can send email alerts when thresholds are exceeded or events occur.
Is mounting hardware included?
Yes, the package includes rack mount brackets and screws for standard 1U rack installation.
What should I do if an outlet stops responding?
First, try to reboot the PDU through the interface or power cycle it. If the issue persists, check network connectivity and contact CyberPower support for further diagnostic.

User questions about PDU15SWHVIEC8FNET CyberPower

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Multiprise avec gestion réseau in PDF format for free! Find your manual PDU15SWHVIEC8FNET - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PDU15SWHVIEC8FNET by CyberPower.

USER MANUAL PDU15SWHVIEC8FNET CyberPower

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : CyberPower

Model : PDU15SWHVIEC8FNET

Category : Multiprise avec gestion réseau