Kramer

VP-482 - Audio/video converter Kramer - Free user manual and instructions

Find the device manual for free VP-482 Kramer in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Kramer VP-482 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type 4x2 VGA/UXGA Matrix Switcher with Audio
Brand Kramer
Model VP-482
Video Inputs 4 VGA (15-pin HD) connectors
Video Outputs 2 VGA (15-pin HD) connectors
Audio Inputs 4 unbalanced stereo audio - mini jacks
Audio Outputs 2 unbalanced stereo audio - mini jacks
Maximum Resolution 1920x1200 (UXGA)
Video Switching Matrix switching with fast, clean cut
Control Front panel buttons, RS-232, IR remote control
Power Supply 12V DC, 2A external adapter
Power Consumption Approx. 12V * 0.5A (6W)
Dimensions (W x D x H) 43.5 cm x 18.5 cm x 4.4 cm (17.1" x 7.3" x 1.7")
Weight 1.2 kg (2.6 lbs)
Rack Mount 19" 1U enclosure, rack mounts included
Operating Temperature 0°C to +40°C (32°F to 104°F)
Enclosure Aluminum chassis with anti-rust finish
Included Accessories Power adapter, IR remote control, rackmount ears, user manual
Audio Follow Video Yes, audio routes with corresponding video input
Signal Handling Handles interlaced and progressive video signals

Frequently Asked Questions - VP-482 Kramer

How do I switch inputs on the Kramer VP-482?
Use the front panel buttons to select the desired input for each output. Press the INPUT button that corresponds to the source you want to route, and then select an OUTPUT button to assign it. The LED indicators will show the current routing configuration.
Can I connect both a computer and a DVD player to the VP-482?
Yes, the VP-482 has four VGA inputs that can accept analog video signals from computers, DVD players, and other VGA-compatible devices. You can also connect audio sources with stereo mini-jack cables.
What is the maximum resolution supported by the Kramer VP-482?
The VP-482 supports resolutions up to 1920x1200 (UXGA) for crisp, high-definition output. It also handles lower resolutions like XGA and SVGA with seamless scaling.
How do I control the VP-482 via RS-232?
Connect the RS-232 cable from your PC or controller to the VP-482's serial port. Use the Kramer K-Config software or send simple ASCII commands to switch inputs, set outputs, and query system status. Refer to the user manual for the command syntax.
Can I output the same input to both outputs simultaneously?
Yes, the matrix switcher allows you to route the same input to both outputs independently. Select the same input source for both outputs using the front panel or RS-232 commands.
Does the VP-482 support audio?
Absolutely. The VP-482 has four stereo audio inputs and two stereo audio outputs. Audio follows the video routing, so when you switch video inputs, the corresponding audio is switched as well.
How do I update the firmware on the VP-482?
Firmware updates are typically not needed unless specified by Kramer. If an update is available, use the K-Config software over RS-232. Download the latest firmware from the Kramer website and follow the instructions in the release notes.
What is the difference between VGA and UXGA?
VGA is a standard 640x480 or 640x480 resolution, while UXGA stands for Ultra Extended Graphics Array, supporting up to 1600x1200. The VP-482 actually goes beyond UXGA, handling 1920x1200 (WUXGA). This means it can process high-definition computer signals with excellent clarity.
How do I troubleshoot no video signal on the output?
Check that the input source is powered and connected securely. Verify the VP-482 is powered on and that the appropriate input is selected for the output. Inspect the VGA cables for bent pins. Also ensure the connected display supports the output resolution. If using audio, check the audio cables as well.
Is the VP-482 rack mountable?
Yes, the VP-482 ships with rackmount ears and fits into a standard 19-inch equipment rack in a 1U space. The included brackets allow easy installation for permanent setups.

User questions about VP-482 Kramer

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Audio/video converter in PDF format for free! Find your manual VP-482 - Kramer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VP-482 by Kramer.

USER MANUAL VP-482 Kramer

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Kramer

Model : VP-482

Category : Audio/video converter