DJ LED252 - Lamp Karma - Free user manual and instructions
Find the device manual for free DJ LED252 Karma in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED DJ Light / Lamp |
| Brand | Karma |
| Model | DJ LED252 |
| Category | Stage Lighting / Effect Light |
| Dimensions (W x H x D) | 10.6 x 11.4 x 8.9 inches |
| Weight | 5.5 lbs |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Power Consumption | 120 W |
| Light Source | 252 x 0.2 W LEDs (RGB) |
| Beam Angle | 45 degrees |
| Control Modes | DMX, Master/Slave, Sound Active, Auto |
| DMX Channels | 7 channels |
| Functions | RGB mixing, strobe, fade, pulse, chase |
| Display | 4-digit LED display for settings |
| Cooling | Silent fan cooling system |
| Housing Material | Aluminum and flame-retardant plastic |
| Mounting | Floor standing, hanging, or truss |
| Safety Features | Overheat protection, safety switch |
| Cleaning | Wipe with a soft dry cloth |
| Repairability | Replaceable LED modules and fuse |
Frequently Asked Questions - DJ LED252 Karma
How do I set the DMX address?
Use the DMX address settings on the LED display. Press the MENU button until you find dAdr, then use the UP/DOWN buttons to set the starting address. Press ENTER to confirm.
What power supply is needed?
The lamp operates on AC 100-240V, 50/60Hz. Connect it to a standard mains outlet using the included power cord.
How to clean the light fixture?
Disconnect power first. Use a soft dry cloth to wipe the housing and lens. Do not use abrasive cleaners or water.
Can I use it without DMX?
Yes, the device has standalone modes including sound-active, auto, and master/slave. In sound mode, it reacts to music via the built-in microphone.
How many DMX channels does it use?
It uses 7 DMX channels for controlling RGB colors, dimmer, strobe, and rotation. Check the manual for channel mapping details.
Is it suitable for outdoor use?
No, the device is rated IP20 and intended for indoor use only. Keep it away from rain, moisture, and extreme temperatures.
How do I replace a burnt LED?
Replacement should be done by a qualified technician. Open the back cover, disconnect the faulty LED module, and install a new one. Always disconnect power before servicing.
What is the correct mounting position?
You can mount the fixture on a truss or stand using the included bracket. Ensure it is secured with a safety cable and positioned with proper ventilation.
How do I synchronize multiple units?
Set one unit as master by choosing the master mode in settings. Connect other units as slaves via DMX cable, and they will follow the master's patterns.
What safety precautions should I follow?
Always use the safety cable when hanging. Never look directly at the light source, and ensure adequate clearance for air flow. Avoid installing near flammable materials.
User questions about DJ LED252 Karma
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual DJ LED252 - Karma and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DJ LED252 by Karma.
USER MANUAL DJ LED252 Karma
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Karma
Model : DJ LED252
Category : Lamp