31008 - Alarm Clock LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free 31008 LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Alarm Clock |
| Brand | La Crosse Technology |
| Model | 31008 |
| Display Type | LED display |
| Time Format | 12-hour and 24-hour selectable |
| Radio-Controlled Time | WWVB time signal synchronization |
| Alarm Function | Yes, with adjustable alarm time |
| Snooze Function | Yes |
| Snooze Duration | Approximately 5 minutes |
| Backlight | Yes, adjustable brightness |
| Power Source | 2 x AA 1.5V batteries |
| Battery Life | Approximately 1 year |
| Dimensions | 115 x 64 x 76 mm (approximate) |
| Weight | 150 g (approximate) |
| Color | Black |
| Mounting | Desktop |
| Included Accessories | User manual, clock (batteries not included) |
| Maintenance | Wipe with a soft, dry cloth |
| Cleaning | Do not use liquid or abrasive cleaners |
| Safety Instructions | Keep away from water and heat sources. Remove batteries during prolonged inactivity. |
| Battery Replacement | Open the battery compartment, install new AA batteries, and ensure correct polarity |
| Operating Temperature | 0°C to 50°C |
Frequently Asked Questions - 31008 LA CROSSE TECHNOLOGY
How do I set the time manually?
Press and hold the Time Set button. Use the + and - buttons to adjust the hour and minute. Release the button to save the setting.
How do I set the alarm?
Press the Alarm Set button to enter alarm setting mode. Use the + and - buttons to adjust the hour and minute. Press the Alarm Set button again to confirm and exit. The alarm indicator will appear on the display.
How do I activate or deactivate the snooze function?
When the alarm sounds, press the Snooze button to temporarily silence it for about 5 minutes. To deactivate snooze entirely, press the Alarm On/Off button to turn the alarm off.
What type of battery does this alarm clock use?
It uses 2 AA (1.5V) batteries. Be sure to insert them with the correct polarity. Replace the batteries when the display becomes dim.
How do I change the batteries?
Locate the battery compartment on the back or bottom of the clock. Open the cover, remove old batteries, and install new AA batteries following the polarity markings. Close the cover securely.
How do I adjust the backlight?
Depending on your model, press the Backlight button to cycle through brightness levels. Some models have an auto-dim setting that lowers brightness at night.
How do I switch between 12-hour and 24-hour format?
Press and hold the 12/24 button (or the Format button) for a few seconds until the display switches. If no dedicated button exists, this option is usually accessible in the setup mode.
How do I turn off the alarm completely?
Press the Alarm On/Off button to disable the alarm. The alarm icon will disappear from the display. To re-enable, press it again.
What should I do if the display is dim?
First, check the backlight settings and adjust the brightness. If the display remains dim, the batteries may be low. Replace them with fresh AA batteries. If the issue persists, contact customer support.
How does the radio-controlled time work?
The clock receives a time signal from the WWVB station nightly and updates automatically. Ensure the clock is placed near a window and away from electronic interference. It will sync within a few nights; you can also force a sync by pressing the RC button (if available).
User questions about 31008 LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm Clock in PDF format for free! Find your manual 31008 - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 31008 by LA CROSSE TECHNOLOGY.