MONOPRICE

15867 - TV wall mount MONOPRICE - Free user manual and instructions

Find the device manual for free 15867 MONOPRICE in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice MONOPRICE 15867 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type TV Wall Mount
Brand Monoprice
Model 15867
Mount Type Tilting
TV Size 26" - 55"
Max Weight Capacity 80 lbs (36.3 kg)
VESA Compatibility 100x100 mm to 400x300 mm
Material Cold-rolled steel
Finish Black powder coat
Tilt Adjustment +15° / -5°
Swivel Adjustment None (fixed wall plate)
Level Adjustment Yes (±3°)
Distance from Wall 1.3" to 1.8" (33-46 mm)
Power Source None (passive device)
Power Consumption 0 W
Included Hardware Mounting brackets, screws, spacers, bubble level
Compatible Wall Types Wood stud, concrete, brick
Installation DIY, requires drilling
Maintenance Wipe with dry cloth; check bolts periodically
Safety Certification ETL listed

Frequently Asked Questions - 15867 MONOPRICE

What is the maximum weight capacity of the Monoprice 15867 TV wall mount?
The maximum weight capacity is 80 lbs (36.3 kg). Make sure your TV does not exceed this limit to ensure safe installation and prevent damage.
What VESA sizes does this wall mount support?
It supports VESA patterns from 100x100 mm to 400x300 mm. Check the hole pattern on the back of your TV to confirm compatibility.
Can the mount tilt down to reduce glare?
Yes, the mount offers tilt adjustment from +15° to -5°, allowing you to angle the TV downward for better viewing angles and reduced glare.
Is the mount compatible with a 75-inch TV?
No, the Monoprice 15867 is designed for TVs from 26 to 55 inches. A 75-inch TV would exceed both the size and weight limits, so you need a heavier-duty mount.
Does the package include all necessary mounting hardware?
Yes, the package includes mounting brackets, screws, spacers, and a bubble level. However, you may need additional hardware if installing on a wall type not specified.
Can it be installed on a concrete wall?
Absolutely, the mount is compatible with wood studs, concrete, and brick. Use appropriate anchors and bolts for your specific wall material.
What is the distance between the TV and the wall?
The distance from the wall is 1.3" to 1.8" (33-46 mm). This low-profile design helps keep your TV close to the wall for a sleek look.
How do I adjust the tilt after installation?
To adjust the tilt, loosen the tilt adjustment bolts on the bracket, set the desired angle, then retighten the bolts securely. Always verify the TV is level.
What should I do if the TV appears crooked?
If the TV is crooked, use the level adjustment feature (±3°) to fine-tune the angle. Slightly loosen the mounting screws, align the TV using a bubble level, and re-tighten.
Is the mount covered by a warranty?
Yes, Monoprice products typically come with a limited warranty. Check the user manual or Monoprice's website for detailed warranty terms and conditions.

User questions about 15867 MONOPRICE

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your TV wall mount in PDF format for free! Find your manual 15867 - MONOPRICE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 15867 by MONOPRICE.

USER MANUAL 15867 MONOPRICE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : MONOPRICE

Model : 15867

Category : TV wall mount