TD 120 - Loudspeaker RCF - Free user manual and instructions
Find the device manual for free TD 120 RCF in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Loudspeaker |
| Brand | RCF |
| Model | TD 120 |
| Speaker Type | Passive 2-way full-range speaker |
| Woofer Size | 12" (300 mm) |
| Tweeter Size | 1" (25 mm) compression driver |
| Frequency Response | 50 Hz – 20 kHz |
| Sensitivity | 98 dB (1W/1m) |
| Power Handling | 300 W RMS, 600 W peak |
| Impedance | 8 ohms |
| Dispersion Angle | 60° x 60° |
| Input Connectors | 2 x Speakon NL4 |
| Crossover Frequency | 1.8 kHz |
| Dimensions (H x W x D) | 580 x 370 x 350 mm |
| Weight | 16 kg |
| Cabinet Material | Multi-ply birch plywood |
| Grille | Steel mesh with acoustic foam |
| Mounting Options | Pole mount socket 35 mm, flying points |
| Recommended Amplifier Power | 300 – 600 W RMS at 8 ohms |
| Maintenance | Wipe with dry cloth; check connections periodically |
| Safety | Protect from moisture; ensure stable placement |
| Spare Parts | Available through RCF authorized service centers |
Frequently Asked Questions - TD 120 RCF
What type of loudspeaker is the RCF TD 120?
The RCF TD 120 is a passive 2-way loudspeaker with a 12" woofer and a 1" compression driver, designed for professional sound reinforcement.
What is the power rating of the TD 120?
It handles 300 W RMS continuous and 600 W peak. It is important to use an amplifier that delivers between 300 and 600 W RMS at 8 ohms for optimal performance without risking driver damage.
How should I connect the TD 120 to my amplifier?
Use the Speakon NL4 connectors on the cabinet. Connect the amplifier output to the speaker input, ensuring the impedance is set to 8 ohms and the amplifier is powered off before connecting to avoid pops.
Can I use the TD 120 without an external crossover?
Yes, the TD 120 includes a built-in passive crossover at 1.8 kHz, so you can feed it with a full-range signal from the amplifier.
What is the best way to position the TD 120 for maximum clarity?
Place the speaker on a pole mount at ear level, tilt it slightly downward to aim at the audience, and avoid placing it too close to walls or corners to reduce bass buildup.
How do I maintain and clean my TD 120?
Clean the cabinet with a dry or slightly damp cloth. Vacuum the grille to remove dust, and periodically inspect the Speakon connectors for corrosion or loose contacts.
What should I check if the speaker produces no sound?
Verify that the amplifier is on and not in protection mode, check the speaker cables and Speakon connectors, and ensure the signal source is active. Try an alternate cable or channel to isolate the issue.
Is the RCF TD 120 suitable for outdoor use?
It is not weather-sealed. Avoid exposing it to rain, moisture, or extreme temperatures. If used outdoors, provide overhead protection and cover it when not in use.
Can I mount the TD 120 on a tripod stand?
Yes, it has a 35 mm pole mount socket on the bottom. Use a sturdy stand rated for the speaker's 16 kg weight to ensure safe and stable placement.
Where can I find replacement parts for the TD 120?
Replacement woofers, tweeters, and crossover boards are available through RCF authorized service centers. Contact RCF support with your model and serial number for the correct spare parts.
User questions about TD 120 RCF
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual TD 120 - RCF and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TD 120 by RCF.
USER MANUAL TD 120 RCF
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RCF
Model : TD 120
Category : Loudspeaker