C-MAX 4110 - Loudspeaker RCF - Free user manual and instructions
Find the device manual for free C-MAX 4110 RCF in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Two-Way Passive Loudspeaker |
| Brand | RCF |
| Model | C-MAX 4110 |
| Frequency Response | 50 Hz - 20 kHz |
| Power Handling | 200 W RMS / 400 W Peak |
| Impedance | 8 Ohms |
| Sensitivity | 95 dB SPL (1W @ 1m) |
| Dispersion | 90° x 60° (H x V) |
| Low-Frequency Driver | 10" Woofer with 2" Voice Coil |
| High-Frequency Driver | 1" Compression Driver with 1.4" Voice Coil |
| Crossover Frequency | 2.5 kHz |
| Enclosure Material | Multi-Ply Birch with Durable Textured Coating |
| Grille | Heavy-Duty Perforated Steel with Acoustic Foam |
| Input Connectors | NL4 Speakon and Barrier Strip Terminals |
| Mounting Options | Pole Mount (35 mm) and Wall Bracket Points |
| Dimensions (H x W x D) | 500 x 320 x 300 mm |
| Weight | 12.5 kg |
| Operating Temperature Range | -10°C to +50°C |
| Protection | Dynamic Overload Protection Circuitry |
| Maintenance | Clean with Soft Dry Cloth; Do Not Use Solvents |
| Safety | Stable Floor Mounting and Professional Rigging |
| Repairability | Accessible Drivers and Crossover for Replacement |
Frequently Asked Questions - C-MAX 4110 RCF
How do I connect the RCF C-MAX 4110 to an amplifier?
The C-MAX 4110 uses both NL4 Speakon and barrier strip connectors. Connect the amplifier output to either connector, ensuring correct polarity.
What is the nominal impedance of the C-MAX 4110?
The nominal impedance is 8 Ohms, making it compatible with a wide range of professional amplifiers.
Can the C-MAX 4110 be used outdoors?
The speaker is not weatherproof. For outdoor use, protect it from rain and humidity with a suitable cover or installation in a sheltered location.
How do I clean and maintain the loudspeaker?
Use a soft dry cloth to wipe the enclosure and grille. Avoid water and cleaning solvents, as they can damage the finish and internal components.
Is the C-MAX 4110 suitable for both floor monitor and PA use?
Yes, this versatile two-way speaker can be used as a main PA cabinet or angled as a floor monitor for live performances.
What is the maximum power handling of the speaker?
The C-MAX 4110 handles 200 W RMS and 400 W peak. Use an amplifier delivering between 200 and 400 watts per channel for safe operation.
Does the speaker come with a mounting bracket?
The speaker includes a pole mount cup and M8 threaded points for wall brackets, but the bracket itself is sold separately.
How can I replace the woofer if it is damaged?
Remove the grille, unscrew the woofer, disconnect the cables, and install a compatible RCF replacement woofer. Refer to the manual for torque specifications.
What type of cable should I use for connecting the speaker?
Use a two-conductor speaker cable with a minimum gauge of 1.5 mm² (AWG 16) for runs up to 10 meters. Increase the gauge for longer distances.
Can I pair two C-MAX 4110 speakers with one amplifier?
Yes, connect two 8-ohm speakers in parallel to create a 4-ohm load. Ensure the amplifier is stable at 4 ohms and can supply sufficient power.
User questions about C-MAX 4110 RCF
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual C-MAX 4110 - RCF and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C-MAX 4110 by RCF.
USER MANUAL C-MAX 4110 RCF
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RCF
Model : C-MAX 4110
Category : Loudspeaker