Cookology

CEI1100BK - Range hood Cookology - Free user manual and instructions

Find the device manual for free CEI1100BK Cookology in PDF.

📄 19 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Cookology CEI1100BK - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Wall-Mounted Chimney Cooker Hood
Brand Cookology
Model CEI1100BK
Finish / Color Black Glass
Width 110 cm (1100 mm)
Height (Adjustable) 60 – 100 cm
Depth 50 cm
Net Weight 21 kg
Power Supply 220–240 V, 50 Hz
Rated Power 280 W
Extraction Rate (Max) 650 m³/h
Noise Level (Max) 65 dB(A)
Speed Settings 3 speeds + boost
Lighting 2 × LED 3 W
Filter Type 3-layer aluminium mesh filter
Ducting Outlet 150 mm
Control Type Touch control
Energy Rating A
Number of Motors 1
Installation Mode Recirculating or ducted

Frequently Asked Questions - CEI1100BK Cookology

How do I clean the grease filter on this hood?
Remove the aluminium mesh filter and wash it with warm soapy water. You can also put it in the dishwasher at low temperature. Dry it completely before refitting. For best performance, clean the filter every 4–6 weeks depending on cooking frequency.
Can the LED lights be replaced?
Yes. The Cookology CEI1100BK uses LED modules (2 × 3 W) which are replaceable. Always switch off the power before changing the bulbs or contact a qualified technician if you are not comfortable doing it yourself.
Can I use it in recirculation mode without ducting?
Absolutely. The hood can be installed in recirculation mode using optional carbon filters (not included in the box). This is ideal for kitchens without an external extraction duct.
What is the recommended installation height above the cooktop?
For best smoke and steam capture, install the hood 65–75 cm above an electric hob and 75–85 cm above a gas hob. Follow the exact measurements shown in the manual for safety.
How often should I clean the grease filter?
It is recommended to clean the grease filter every 6 to 8 weeks if you cook frequently. If you use the hood daily, clean it more often to maintain air suction and prevent fire hazards.
Why is the hood vibrates or makes unusual noise?
Check that the installation is secure and the ducting is not blocked or kinked. Also ensure the filters are clean. If noise persists, verify that the motor is not obstructed by a foreign object.
Does the hood come with carbon filters included?
No, carbon filters are sold separately and are only required when using the hood in recirculation mode. Aluminium grease filters are included as standard.
How do I activate the boost feature?
The boost (maximum) speed is activated by pressing the boost button on the touch panel. It runs for a limited time (usually 10 minutes) then automatically returns to the previous speed setting.
Can this hood be installed on a ceiling for an island?
No, the CEI1100BK is designed as a wall-mounted chimney hood. It cannot be used as an island ceiling hood. Refer to the manual for the correct mounting configuration.
How do I reset the filter cleaning indicator?
After cleaning or replacing the filters, press and hold the filter reset button for 3 seconds until the indicator goes off. If your model does not have this button, check the manual for the specific reset sequence.

User questions about CEI1100BK Cookology

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Range hood in PDF format for free! Find your manual CEI1100BK - Cookology and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CEI1100BK by Cookology.

USER MANUAL CEI1100BK Cookology

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Cookology

Model : CEI1100BK

Category : Range hood