EPS-25-36 - Charger Mean Well - Free user manual and instructions
Find the device manual for free EPS-25-36 Mean Well in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Encapsulated AC/DC power supply / battery charger |
| Brand | Mean Well |
| Model | EPS-25-36 |
| Output Voltage | 36V DC |
| Output Current | 0.7A |
| Output Power | 25.2W |
| Input Voltage Range | 85-264VAC or 120-370VDC |
| Dimensions | 74 x 42 x 25 mm (approx.) |
| Weight | 100 g (approx.) |
| Efficiency | 80% typical |
| Operating Temperature | -20°C to +50°C |
| Cooling | Free air convection |
| Protection | Short circuit, overload, overvoltage |
| Mounting | Screw or PCB mount |
| Maintenance | Regularly check connections, clean dust from vents |
| Safety Certifications | UL, CE, RoHS compliant |
| Repairability | Encapsulated unit; not user-serviceable, replace if faulty |
| General Information | Designed for industrial and consumer electronics charging applications |
Frequently Asked Questions - EPS-25-36 Mean Well
What is the output voltage and current of the Mean Well EPS-25-36?
The EPS-25-36 provides a 36V DC output at 0.7A, delivering up to 25.2W of power.
Can this unit be used as a battery charger?
Yes, it can be used to charge 36V battery banks if the charging current is appropriate. However, it is a power supply without built-in charge control, so an external controller may be needed for proper battery charging.
What is the input voltage range?
The input accepts 85-264VAC or 120-370VDC, making it suitable for worldwide AC mains use.
How do I connect the wiring?
Connect the AC input to the two input terminals (L and N) and the DC output to the two output terminals (+ and -). Ensure correct polarity and secure connections before energizing.
Does the EPS-25-36 have short circuit protection?
Yes, it features short circuit protection, along with overload and overvoltage protections for reliable operation.
What are the mounting dimensions?
The unit measures approximately 74 mm x 42 mm x 25 mm. It can be mounted using screws or soldered directly onto a PCB.
Can it be used outdoors?
The EPS-25-36 is not rated for outdoor use unless placed in an IP-rated enclosure. It is designed for indoor, dry environments.
What is the expected lifespan?
With proper ventilation and within temperature limits, the unit typically has a mean time between failures (MTBF) of over 100,000 hours.
Is it safe for sensitive electronic equipment?
Yes, the output is regulated with low ripple and noise, suitable for powering microcontrollers, sensors, and other sensitive loads.
What should I do if there is no output?
Check the input supply, fuses, and wiring connections. If the unit is still dead, it may have triggered its protection or failed. Do not open the encapsulated unit; replace it with a new one.
User questions about EPS-25-36 Mean Well
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Charger in PDF format for free! Find your manual EPS-25-36 - Mean Well and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EPS-25-36 by Mean Well.
USER MANUAL EPS-25-36 Mean Well
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mean Well
Model : EPS-25-36
Category : Charger