DCS-9200T - Security Camera D-LINK - Free user manual and instructions
Find the device manual for free DCS-9200T D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | D-Link |
| Model | DCS-9200T |
| Connectivity | Wireless 802.11 b/g |
| Video Resolution | 640 x 480 pixels (VGA) |
| Video Compression | MJPEG |
| Lens | Fixed focal length, 4.0 mm |
| Night Vision | Infrared LEDs with up to 5 meters range |
| Motion Detection | Yes, software-based with email alerts |
| Audio | Built-in microphone |
| Main Functions | Remote monitoring, motion detection, real-time video streaming via web browser |
| Power Supply | 5V DC, 2.5A |
| Power Consumption | 5W typical |
| Dimensions (W x H x D) | 100 x 80 x 60 mm |
| Weight | 180 g |
| Mounting | Wall mountable with included bracket |
| Operating Temperature | 0 to 40 degrees Celsius |
| Operating Humidity | 20% to 80% RH, non-condensing |
| Security | WEP, WPA/WPA2 wireless encryption, password protected access |
| Maintenance and Cleaning | Wipe the camera body with a soft dry cloth; carefully clean the lens with a microfiber cloth |
| Spare Parts and Reparability | Contact D-Link authorized service centers; do not open the device yourself |
| General Information | Free user manual available for download in PDF format on notice-facile.com |
Frequently Asked Questions - DCS-9200T D-LINK
How do I reset the D-Link DCS-9200T to factory defaults?
To reset the camera, press and hold the reset button located on the back panel for about 10 seconds until the LED blinks. The camera will restart with factory settings.
What is the default IP address and login credentials?
The default IP address is usually 192.168.0.20 and the default login is often 'admin' with a blank password. Refer to the manual for specific details.
How can I set up the DCS-9200T for remote viewing over the internet?
First configure the camera on your local network via the setup wizard. Then enable remote access by setting up port forwarding on your router or using D-Link's DDNS service to access the camera from anywhere.
Does the DCS-9200T support night vision?
Yes, it has infrared LEDs that allow the camera to capture black-and-white images in low-light or dark conditions up to approximately 5 meters.
How do I connect the DCS-9200T to my wireless network?
Use the bundled setup CD or press the WPS button if your router supports it. Alternatively, access the camera's web interface via Ethernet and configure the Wi-Fi settings manually.
What should I do if my camera is not detected on the network?
Check the power and network cable connections. Use the D-Link setup utility to scan for the camera. If it remains undetected, perform a factory reset and reconfigure.
How can I update the firmware of the DCS-9200T?
Download the latest firmware from the D-Link support website. Access the camera's web interface, go to Maintenance or Tools, and upload the firmware file following the on-screen instructions.
How do I configure motion detection alerts?
In the camera's web interface, navigate to Motion Detection settings. Enable the feature and set the sensitivity. Configure email alerts by providing an SMTP server and recipient address.
Can I store recordings on an SD card?
The DCS-9200T does not have an SD card slot. However, you can set up network recording to a computer or a NAS device using the bundled software or by configuring FTP/sMB in the camera settings.
How should I clean and maintain the DCS-9200T?
Wipe the camera housing with a soft dry cloth to remove dust. Use a microfiber cloth to gently clean the lens. Avoid using liquid cleaners directly. Ensure the camera is powered off before cleaning.
User questions about DCS-9200T D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DCS-9200T - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DCS-9200T by D-LINK.
USER MANUAL DCS-9200T D-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : D-LINK
Model : DCS-9200T
Category : Security Camera