BDT-2978 - Thermometer Becken - Free user manual and instructions
Find the device manual for free BDT-2978 Becken in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Thermometer |
| Measurement Range | 32.0°C to 42.9°C |
| Accuracy | ±0.1°C (35°C - 42°C) |
| Measurement Time | Approximately 60 seconds |
| Display | LCD with last reading memory |
| Fever Alert | Audible beep when temperature exceeds 37.8°C |
| Auto Shut-Off | Yes, after approximately 10 minutes |
| Battery | 1.5V LR41 button cell (included) |
| Dimensions | 130 x 25 x 15 mm |
| Weight | 15 g (including battery) |
| Materials | ABS plastic body, stainless steel probe |
| Water Resistance | Splash proof, IP22 |
| Cleaning | Wipe with 70% isopropyl alcohol before and after use |
| Safety Certifications | CE, RoHS compliant |
| Repairability | Battery replaceable; probe is sealed and not user-serviceable |
| General Use | Suitable for oral, rectal, or axillary measurement |
Frequently Asked Questions - BDT-2978 Becken
How should I measure my temperature with the Becken BDT-2978?
Place the probe under your tongue (oral), in the rectum (rectal), or in the armpit (axillary). Press the on/off button, wait for the beep, and read the display. For best accuracy, keep your mouth closed during oral measurement.
What does the fever beep mean?
A continuous beep or a special alarm sound indicates a fever when the measured temperature is above 37.8°C (100°F). Normal readings produce a single short beep.
How long does it take to get a reading?
The BDT-2978 typically gives a reading in about 60 seconds. The actual time may vary slightly depending on the measurement site and the person's condition.
How do I replace the battery?
Slide the battery cover on the back of the thermometer open using a small screwdriver. Remove the old LR41 button cell, insert a new one with the positive (+) side facing up, and close the cover securely.
Can I use this thermometer on babies?
Yes, the BDT-2978 is safe for newborns and infants, but we recommend rectal measurement for the most accurate temperature in babies under 3 months. Always clean the probe thoroughly before and after use.
How do I clean the thermometer?
Use a soft cloth dampened with 70% isopropyl alcohol to wipe the probe and the body. Never immerse the thermometer in water or use harsh cleaning agents, as this can damage the electronics.
What is the accuracy of this thermometer?
The BDT-2978 is accurate to ±0.1°C (0.2°F) within the range of 35°C to 42°C. This meets the requirements for clinical use according to ASTM standards.
Why does the display show 'Lo' or 'Hi'?
'Lo' indicates the temperature is below 32.0°C (89.6°F), and 'Hi' indicates it is above 42.9°C (109.2°F). This usually means the probe was not placed correctly or the ambient temperature is too extreme.
Does the thermometer have a memory function?
Yes, the BDT-2978 automatically stores the last reading in memory. When you turn it on again, the previous temperature is displayed for a few seconds before the device is ready for a new measurement.
Is this thermometer waterproof?
No, it is only splash proof (IP22). Do not submerge it in water or expose it to heavy moisture. For cleaning, use a damp cloth with alcohol instead of rinsing under a tap.
User questions about BDT-2978 Becken
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Thermometer in PDF format for free! Find your manual BDT-2978 - Becken and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BDT-2978 by Becken.
USER MANUAL BDT-2978 Becken
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Becken
Model : BDT-2978
Category : Thermometer