DNR83232 - Security Camera FLIR - Free user manual and instructions
Find the device manual for free DNR83232 FLIR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Security Camera (IP Camera) |
| Brand | FLIR |
| Model | DNR83232 |
| Image Sensor | 1/2.5\" Progressive Scan CMOS |
| Max Resolution | 8 Megapixels (3840 × 2160) |
| Video Compression | H.265, H.264 |
| Lens | Fixed 3.6mm, F1.8 |
| Field of View | 82° horizontal |
| Night Vision | Yes, 30m range |
| Weatherproof Rating | IP66 |
| Power Over Ethernet | IEEE 802.3af/at |
| Operating Temperature | -30°C to 60°C |
| Power Consumption | Max 12W |
| Dimensions (W×H×D) | 70 mm × 244 mm × 70 mm |
| Weight | 950 g |
| Connectivity | RJ-45 10/100 Mbps |
| Audio | Built-in microphone and speaker |
| Storage | MicroSD slot (up to 256 GB) |
| Motion Detection | Yes, configurable zones |
| Privacy Mask | Yes |
| Cleaning and Maintenance | Wipe with soft dry cloth |
| Safety Instructions | Use certified PoE injector; do not disassemble |
Frequently Asked Questions - DNR83232 FLIR
How do I reset my FLIR DNR83232 to factory defaults?
Press and hold the reset button on the device for about 10 seconds until the LED flashes. The camera will reboot with default settings. Note that this will erase all custom configurations. Use a paperclip to access the reset button.
Can I store video recordings locally?
Yes, the DNR83232 supports a microSD card up to 256 GB for local storage. Insert the card into the slot and enable recording in the camera settings. It supports continuous, motion-triggered, and scheduled recording.
How far can the camera see at night?
The built-in infrared LEDs provide night vision up to 30 meters (98 feet) in total darkness, allowing clear black-and-white video even with no ambient light.
Is the camera suitable for outdoor use?
Yes, it has an IP66 weatherproof rating, making it resistant to rain and dust. It can operate in temperatures from -30°C to 60°C, ideal for most outdoor environments.
How do I set up motion detection alerts?
Access the camera's web interface, go to "Motion Detection" settings, enable it, and define active zones and sensitivity. You can then configure push notifications or email alerts in the mobile app.
Can I talk through the camera?
Yes, the camera has a built-in microphone and speaker, supporting two-way audio. Use the FLIR app or compatible VMS to listen and speak without additional hardware.
What is the maximum resolution and quality?
The camera captures 8 megapixel video at 3840×2160 resolution (4K UHD) at up to 15 frames per second. It uses H.265 compression to save bandwidth and storage while maintaining high image detail.
How do I update the firmware?
Download the latest firmware from the official FLIR website, then log into the camera's management page, go to "Maintenance" > "Upgrade", and upload the file. Do not disconnect power during the update.
Does the camera support Power over Ethernet (PoE)?
Yes, it is PoE compliant (IEEE 802.3af/at). Connect it directly to a PoE switch or a PoE injector for both power and data over one Ethernet cable.
What should I do if the camera stops responding?
First, check the network connection and power supply. Restart the camera by cutting power for 10 seconds. If it persists, perform a factory reset as described in the manual. If the problem continues, contact FLIR support.
User questions about DNR83232 FLIR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DNR83232 - FLIR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DNR83232 by FLIR.
USER MANUAL DNR83232 FLIR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FLIR
Model : DNR83232
Category : Security Camera