01985.120 - Variateur d'intensité lumineuse Vimar - Free user manual and instructions
Find the device manual for free 01985.120 Vimar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Light dimmer |
| Brand | Vimar |
| Model | 01985.120 |
| Mounting method | Flush-mounted wall unit |
| Control type | Rotary knob |
| Operating voltage | 230 V AC, 50/60 Hz |
| Minimum load (LED) | 3 W |
| Maximum load (incandescent/halogen) | 400 W |
| Maximum load (LED) | 100 W |
| Standby power | < 0.5 W |
| Dimensions (HxWxD) | 75 x 75 x 40 mm |
| Weight | 0.15 kg |
| Protection rating | IP20 |
| Operating temperature | -10 °C to +40 °C |
| Terminal capacity | Up to 2.5 mm² |
| Soft start function | Yes, preserves bulbs |
| Minimum brightness adjustment | Yes, via trimmer |
| Compatibility | Vimar flush-mounted frames |
| Standards | CE, RoHS |
| Color | White (typically) |
| Warranty | 2 years |
Frequently Asked Questions - 01985.120 Vimar
What types of bulbs are compatible with the Vimar 01985.120 dimmer?
The dimmer supports incandescent, halogen (230V) and most dimmable LED bulbs. For proper operation, check the minimum and maximum load ratings and ensure your LED bulbs are marked as dimmable.
How do I adjust the minimum brightness level?
The dimmer features a small trimmer on the front or side. Use a small screwdriver to rotate it until the desired minimum brightness is achieved. This allows you to avoid flickering at low levels.
Can I control LED lamps with this dimmer?
Yes, but only dimmable LED lamps are recommended. The total LED load must be between 3 W and 100 W typically. Always consult the LED manufacturer for compatibility.
Is the dimmer suitable for 230V electrical systems?
Yes, the Vimar 01985.120 is designed for standard European 230 V AC mains, at 50/60 Hz.
What is the maximum load capacity?
The maximum load depends on the lamp type: 400 W for incandescent or halogen, and 100 W for dimmable LED. Exceeding these values may damage the dimmer.
How do I connect the dimmer?
Connect the phase wire (L) to the terminal marked L and the switched phase to the load terminal. The neutral is not required for the dimmer itself. Ensure the installation is done by a qualified electrician.
Does it require a neutral wire?
No, the Vimar 01985.120 is a two-wire dimmer and does not need a neutral connection for its basic operation. However, some LED lamps may behave differently without a neutral.
Can I use it with a ceiling fan?
It is not recommended. This dimmer is specifically designed for resistive loads like lighting. Using it with a fan or inductive load may cause damage to the motor and the dimmer.
How to clean and maintain the dimmer?
Clean the surface with a dry soft cloth. Do not use abrasive cleaners or solvents. Periodically check the tightness of the screw terminals if accessible. There is no special maintenance required for the electronics.
Is it compatible with Vimar frames?
Yes, this dimmer fits standard Vimar flush-mounted frames, including the Plana, Idea, and Eikon series. It ensures a perfect aesthetic integration.
User questions about 01985.120 Vimar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Variateur d'intensité lumineuse in PDF format for free! Find your manual 01985.120 - Vimar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 01985.120 by Vimar.
USER MANUAL 01985.120 Vimar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vimar
Model : 01985.120
Category : Variateur d'intensité lumineuse