AORUS Gen4 7000s - SSD GIGABYTE - Free user manual and instructions
Find the device manual for free AORUS Gen4 7000s GIGABYTE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | SSD (Solid State Drive) |
| Interface | PCIe 4.0 x4, NVMe 1.4 |
| Form Factor | M.2 2280 |
| Capacity | 1TB / 2TB variants |
| Sequential Read Speed | Up to 7000 MB/s |
| Sequential Write Speed | Up to 6850 MB/s |
| Controller | Phison PS5018-E18 |
| NAND Type | 3D TLC NAND |
| NVMe Support | Yes, NVMe 1.4 |
| MTBF | 1,800,000 hours |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -40°C to 85°C |
| Weight | Approximately 10g (without heatsink) |
| Dimensions | 80mm x 22mm x 2.3mm (M.2 standard) |
| Power Consumption | Up to 6.5W (active), 0.003W (idle) |
| Warranty | 5-year limited warranty |
| Heatsink | Optional AORUS M.2 heatsink compatible |
| Compatibility | Motherboards with M.2 PCIe 4.0 slot |
| Installation | Screw mount, M.2 slot installation |
| Maintenance | No regular maintenance required; firmware updates via GIGABYTE SSD Tool Box |
| Safety | Low operating voltage, overheat protection |
| Spare parts and repairability | Non-repairable; replace unit if faulty |
| General Information | High-performance NVMe SSD designed for gaming and content creation |
Frequently Asked Questions - AORUS Gen4 7000s GIGABYTE
How do I install the AORUS Gen4 7000s SSD?
Turn off your computer, locate the M.2 slot on your motherboard, insert the SSD at a 30-degree angle, and secure it with the screw. Ensure your motherboard supports PCIe 4.0 for full performance.
What is the maximum read speed?
The sequential read speed is up to 7000 MB/s, depending on the capacity and system configuration.
Can I use it with a PCIe 3.0 slot?
Yes, it is backward compatible with PCIe 3.0, but speeds will be limited to the PCIe 3.0 bandwidth (around 3500 MB/s).
How do I check the health of the SSD?
You can use the GIGABYTE SSD Tool Box software to monitor health, temperature, and firmware updates.
Does the SSD come with a heatsink?
The standard model does not include a heatsink, but you can purchase the AORUS M.2 heatsink separately to improve thermal performance.
What is the warranty period?
GIGABYTE provides a 5-year limited warranty for the AORUS Gen4 7000s SSD.
Can I clone my existing drive to this SSD?
Yes, you can use software like Acronis True Image (sometimes included) or GIGABYTE data migration tools to clone your current system.
What are the recommended temperatures?
The operating temperature range is 0°C to 70°C. For sustained heavy loads, a heatsink is recommended to avoid thermal throttling.
Is the SSD compatible with PlayStation 5?
Yes, the AORUS Gen4 7000s meets the PS5 M.2 SSD requirements (PCIe 4.0, 2280 form factor, sequential read speed exceeding 5500 MB/s).
What should I do if my SSD is not detected?
Check if it is seated properly, try another M.2 slot, and verify that your motherboard's BIOS is updated. You can also test the SSD in a different system.
User questions about AORUS Gen4 7000s GIGABYTE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your SSD in PDF format for free! Find your manual AORUS Gen4 7000s - GIGABYTE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AORUS Gen4 7000s by GIGABYTE.
USER MANUAL AORUS Gen4 7000s GIGABYTE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GIGABYTE
Model : AORUS Gen4 7000s
Category : SSD