VTD-T4D6HR2MD - Security Camera Vitek - Free user manual and instructions
Find the device manual for free VTD-T4D6HR2MD Vitek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Vitek |
| Model | VTD-T4D6HR2MD |
| Image Sensor | 1/2.7" CMOS Progressive Scan |
| Resolution | 4 Megapixels (2592 x 1520) |
| Lens | 3.6mm fixed lens |
| IR Range | Up to 20 meters |
| Video Output | HD-TVI / CVI / AHD / CVBS switchable |
| Protection Rating | IP67 weatherproof housing |
| Power Supply | DC 12V ±10%, 500mA |
| Power Consumption | 6W max |
| Dimensions | 120 x 70 x 70 mm (approx.) |
| Weight | 500 g (approx.) |
| Operating Temperature | -30°C to +60°C |
| Main Functions | Color imaging, night vision, motion detection (via DVR), remote viewing |
| Maintenance | Clean lens with a soft dry cloth; avoid water, strong detergents, and direct sunlight |
| Safety | Install at sufficient height to prevent tampering; use a certified DC power adapter |
| Spare Parts & Repairability | Replacement power adapter and mounting bracket available; lens is not user-serviceable |
| General Information | Free user manual available for download; supports multiple language translations |
Frequently Asked Questions - VTD-T4D6HR2MD Vitek
How do I connect the Vitek VTD-T4D6HR2MD camera to a DVR?
Connect a coaxial cable from the camera's BNC output to the HD-TVI/CVI/AHD compatible DVR port. Then plug the 12V DC power adapter into the camera and a power outlet. Ensure the DVR is set to the correct signal mode.
What type of cable is required for operation?
Use a 75-ohm coaxial cable (RG59 or RG6) for video transmission. The camera also requires a 12V DC power cable, or you can use a Power over Coax adapter if supported by your setup.
Can the camera be used outdoors?
Yes, the VTD-T4D6HR2MD features an IP67 weatherproof housing, making it suitable for outdoor installation. It can withstand rain, dust, and extreme temperatures.
How do I reset the camera to factory settings?
There is typically a small reset button on the camera's cable or near the sensor. Press and hold it for 10 seconds while the camera is powered on. The camera will restart with default settings.
What is the maximum infrared distance?
The built-in IR LEDs provide night vision up to 20 meters in complete darkness. The effective range may vary depending on the environment and the position of the camera.
Does the camera support audio recording?
This model does not have a built-in microphone or audio output. It is a video-only security camera. For audio, you would need an external microphone connected to your DVR.
Where can I download the user manual?
The user manual is available for free on Notice-Facile.com. Simply search for the model VTD-T4D6HR2MD and download the PDF. You can also request a translated version via email.
What power supply should I use?
Use a DC 12V power adapter with at least 500mA output. Ensure the voltage is stable and within ±10% to avoid damage. If in doubt, consult the manual for exact specifications.
Can I use this camera with a standard analog DVR?
Yes, the camera supports switchable outputs (TVI/CVI/AHD/CVBS). You can set it to CVBS mode to work with older analog DVRs, though the resolution will be limited to 720x576 (PAL) or 720x480 (NTSC).
How should I clean and maintain the camera lens?
Use a soft, dry microfiber cloth to gently wipe the lens. Avoid water, solvents, or abrasive cleaners. Regularly check the housing for dirt and seal integrity to maintain the IP67 rating.
User questions about VTD-T4D6HR2MD Vitek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual VTD-T4D6HR2MD - Vitek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VTD-T4D6HR2MD by Vitek.