ES-32E11H - Security Camera ZKTeco - Free user manual and instructions
Find the device manual for free ES-32E11H ZKTeco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | ZKTeco |
| Model | ES-32E11H |
| Product Type | Security Camera |
| Image Sensor | 1/2.8-inch progressive scan CMOS |
| Maximum Resolution | 3 Megapixels (2304 x 1296) |
| Video Compression | H.265 / H.264 |
| Lens | Fixed 3.6 mm lens |
| Night Vision | Infrared LEDs with up to 20 m range |
| Weatherproof Rating | IP67 |
| Power Supply | DC 12V, 1A |
| Power Consumption | 4W max |
| Network Connection | 10/100 RJ45 Ethernet port |
| Storage | MicroSD card up to 128GB / NVR |
| Remote Access | Mobile app and web browser |
| Main Functions | Surveillance, night vision, motion detection, remote live viewing |
| Dimensions | 180 x 70 x 70 mm |
| Weight | 0.45 kg |
| Mounting | Wall or ceiling bracket with screws |
| Operating Temperature | -30°C to 60°C |
| Maintenance and Cleaning | Wipe with soft dry cloth; avoid solvents and moisture |
| Safety | Disconnect power before maintenance; use approved power supply |
| Spare Parts and Reparability | Contact certified technician; use manufacturer-approved parts only |
| Manual Information | 2-page PDF user manual in English |
Frequently Asked Questions - ES-32E11H ZKTeco
How do I connect the ES-32E11H to my network?
Use an Ethernet cable to connect the camera to your router or NVR, then configure the IP address through the supplied software or web interface.
Does the camera support night vision?
Yes, the camera has infrared LEDs that provide monochrome video in low light and complete darkness up to 20 metres.
How do I reset the camera to factory settings?
Press and hold the reset button on the camera for about 10 seconds. The status LED will blink to confirm that all settings have been restored.
What power supply do I need?
Use the included DC 12V adapter or another regulated power source with a minimum output of 1A. Never connect the camera to an unregulated power supply.
Can I view the camera from my smartphone?
Yes, after connecting the camera to your network, install the manufacturer mobile app, scan the QR code or enter the device ID, and access live video anywhere.
How much storage is available for recordings?
The camera supports a MicroSD card up to 128GB for onboard storage. You can also connect it to an NVR for larger recording capacity.
Is the housing waterproof?
The camera is rated IP67, meaning it is protected against dust and can withstand temporary immersion in water. It is suitable for outdoor installation.
How should I clean the camera lens?
Use a soft microfiber cloth to gently wipe the lens. Do not use alcohol, solvent, or water spray directly on the lens or casing.
How do I enable motion detection alerts?
Open the camera settings, select Motion Detection, enable the feature, set the detection zone and sensitivity, then save. You will receive push notifications if motion occurs.
What should I do if the live view is black or not available?
Check the power and network cable, confirm the IP address, and ensure the camera is not in night mode with a faulty IR light. If the problem continues, perform a factory reset.
User questions about ES-32E11H ZKTeco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual ES-32E11H - ZKTeco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ES-32E11H by ZKTeco.
USER MANUAL ES-32E11H ZKTeco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZKTeco
Model : ES-32E11H
Category : Security Camera