433-3256A - Wall clock LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free 433-3256A LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall Clock |
| Brand | La Crosse Technology |
| Model | 433-3256A |
| Display Type | LCD digital display |
| Time Reception | WWVB radio-controlled atomic time |
| Time Zones | 7 US time zones (Atlantic to Hawaiian) selectable |
| Date Display | Month, day and day of week |
| Time Format | 12-hour or 24-hour user selectable |
| Indoor Temperature Range | 32°F to 122°F (0°C to 50°C) |
| Outdoor Temperature Range | -39.8°F to 139.8°F (-39.9°C to 59.9°C) |
| Wireless Sensor | 433 MHz remote sensor with 100 ft (30 m) range |
| Battery Requirements | 2 x AA (LR6) for clock, 2 x AA for sensor (not included) |
| Battery Life | Up to 12 months with quality alkaline batteries |
| Mounting Options | Free-standing or wall mountable |
| Dimensions | 11.8 x 1.5 x 11.8 inches (30 x 3.8 x 30 cm) |
| Weight | 1.2 lbs (0.54 kg) |
| Maintenance | Clean with a soft, dry cloth; avoid harsh cleaners |
| Safety | Use fresh batteries; remove during long storage |
| Spare Parts | Replacement remote sensor available (compatible 433 MHz) |
| Included Accessories | Wall clock, remote sensor, instruction manual |
Frequently Asked Questions - 433-3256A LA CROSSE TECHNOLOGY
How do I set the time manually?
Set the time by pressing the SET button to enter time setting mode. Use the +/− buttons to adjust hours and minutes. Press SET again to confirm and exit.
How do I install the batteries?
Open the battery compartment on the back of the clock and the sensor. Insert 2 AA batteries in each, observing correct polarity. Close the compartment and wait for the clock to start searching for the atomic signal.
How do I reset the clock to factory settings?
Use a paperclip to press the RESET button located inside the battery compartment. This clears all settings and restarts the search for the atomic signal.
Why is my clock not receiving the atomic time signal?
The atomic signal is received best at night. Place the clock near a window and away from electronics. Check that the time zone is set correctly. Press the SET button briefly to search for the signal again.
How do I change between 12-hour and 24-hour time format?
In time setting mode, use the +/− buttons to toggle between 12H and 24H format. Press SET to save.
How do I set the time zone?
Press and hold the SET button to enter setup. Use the +/− buttons to select your time zone (AST, EST, CST, MST, PST, AKT, HAT). Press SET to continue.
What is the range of the wireless sensor?
The sensor transmits up to 100 feet (30 meters) in open air. Reduce distance if walls or metal obstructions reduce signal.
How should I clean and maintain the clock?
Wipe the clock with a soft dry cloth. Never use water or chemical cleaners. Remove batteries if not used for extended periods.
Can I use rechargeable batteries?
Rechargeable batteries often have lower voltage and may cause irregular operation. Use fresh alkaline batteries for best performance.
Where should I place the remote sensor?
Place the sensor outdoors under an eave, away from direct sun, rain, and heat sources. Ensure it is within range and not near large metal objects.
User questions about 433-3256A LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wall clock in PDF format for free! Find your manual 433-3256A - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 433-3256A by LA CROSSE TECHNOLOGY.
USER MANUAL 433-3256A LA CROSSE TECHNOLOGY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LA CROSSE TECHNOLOGY
Model : 433-3256A
Category : Wall clock