ARHG30LHTBP - Air conditioner FUJITSU - Free user manual and instructions
Find the device manual for free ARHG30LHTBP FUJITSU in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Air conditioner (split system, wall-mounted) |
| Brand | Fujitsu |
| Model | ARHG30LHTBP |
| Cooling capacity | 3.0 kW (10,200 BTU/h) |
| Heating capacity | 3.4 kW (11,600 BTU/h) |
| Recommended room area | 20–30 m² |
| Power supply | 220–240 V, 50 Hz |
| Cooling power input | 800 W |
| Heating power input | 850 W |
| Energy efficiency class | A |
| Refrigerant | R32 |
| Indoor unit dimensions (W×H×D) | 890 × 230 × 290 mm |
| Outdoor unit dimensions (W×H×D) | 660 × 530 × 240 mm |
| Indoor unit weight | 9.0 kg |
| Outdoor unit weight | 25.0 kg |
| Operating modes | Cooling, heating, fan, dehumidifier, auto |
| Air filter | Antibacterial washable filter |
| Fan speeds | 4 speeds (including auto) |
| Noise level (indoor) | 25–40 dB(A) |
| Noise level (outdoor) | 50 dB(A) |
| Timer function | 24-hour on/off timer |
| Remote control | Yes, included |
Frequently Asked Questions - ARHG30LHTBP FUJITSU
How do I clean the air filter?
Turn off the unit, open the front panel, remove the filter, vacuum or wash with water, dry thoroughly, and replace.
How do I set the cooling mode?
Use the remote control, press MODE until the snowflake icon appears, then set the temperature lower than the room temperature.
Why is the unit not cooling properly?
Check if the filter is dirty, ensure the mode is set to cooling, verify that the outdoor unit has adequate clearance, and inspect the display for error codes.
Can I use an extension cord or power strip?
No, the unit should be plugged directly into a dedicated wall outlet with the correct voltage and amperage to prevent fire or electrical hazards.
How often should I service the air conditioner?
It is recommended to have a professional maintenance check once a year before the cooling season, to ensure optimal performance and energy efficiency.
What type of refrigerant does this unit use?
This model uses R32 refrigerant, which has a lower global warming potential and is more environmentally friendly than older refrigerants.
How do I set the on/off timer?
Press the TIMER button on the remote, then use the +/− buttons to set the desired time for automatic start or stop.
What should I do if the remote control is not working?
Replace the batteries with fresh ones, point the remote directly at the indoor unit sensor, and clear any obstructions. If it still fails, reset the unit by unplugging it for 1 minute.
What is the recommended temperature setting for heating?
For optimal comfort and energy efficiency, set the heating temperature between 20°C and 22°C. Each degree above increases energy consumption by approximately 6%.
Does the air conditioner have a dehumidification mode?
Yes, press the MODE button until the water drop icon appears. This mode removes excess humidity from the air without excessive cooling.
User questions about ARHG30LHTBP FUJITSU
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual ARHG30LHTBP - FUJITSU and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ARHG30LHTBP by FUJITSU.
USER MANUAL ARHG30LHTBP FUJITSU
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FUJITSU
Model : ARHG30LHTBP
Category : Air conditioner