208-142 - Uncategorized Steren - Free user manual and instructions
Find the device manual for free 208-142 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Steren |
| Model | 208-142 |
| Product Type | Digital Multimeter |
| Display | 3.5-digit LCD, 2000 counts |
| AC Voltage Range | 0–600 V |
| DC Voltage Range | 0–600 V |
| DC Current Range | 0–10 A |
| Resistance Range | 0–20 MΩ |
| Continuity Test | Yes, with buzzer |
| Diode Test | Yes |
| Transistor Test | Yes |
| Auto-Off | Yes |
| Overload Protection | Yes |
| Safety Rating | CAT II 600 V |
| Power Source | 9 V battery (6F22) |
| Dimensions | Approx. 130 x 70 x 30 mm |
| Weight | Approx. 180 g (including battery) |
| Maintenance | Wipe with dry cloth, no solvents |
| Spare Parts | Replacement test leads and battery available |
Frequently Asked Questions - 208-142 Steren
How do I measure DC voltage with the Steren 208-142?
Set the rotary switch to the V DC position, insert the black test lead into the COM jack and the red lead into the VΩmA jack, then place the probes across the circuit. Read the value on the LCD.
How do I measure AC voltage?
Turn the rotary switch to the V AC position, connect the test leads as mentioned for DC voltage, and touch the probes to the AC power source. The reading will appear on the display.
How do I measure DC current?
Switch to the appropriate DC current range (e.g., 10A for large currents). Insert the black lead into COM and the red lead into the 10A jack for high currents or the mA jack for low currents. Connect the meter in series with the circuit.
How do I test continuity?
Set the selector to the continuity symbol (usually a diode/beep icon). Connect the test leads and touch the ends of a wire or component. If the resistance is low, the buzzer will sound.
What battery does the multimeter use and how do I replace it?
The Steren 208-142 operates on a standard 9V 6F22 battery. To replace it, remove the screw on the back cover, lift the battery compartment, disconnect the old battery, connect a new one, and close the cover securely.
What does the 'OL' reading mean?
The OL display stands for Overload or Open Loop. It indicates that the measured value exceeds the selected range or that the circuit is open. Select a higher range if necessary.
How do I use the diode test function?
Set the rotary switch to the diode symbol. Place the red probe on the anode and the black probe on the cathode of the diode. The display will show the approximate forward voltage drop. Reverse the leads to check for blockage.
What safety precautions should I take when using this multimeter?
Always start with the correct function and range, inspect test leads for damage, and do not measure circuits above 600 V. Use the provided CAT II rated protection and never touch probes while measuring live circuits.
Why is there no reading when I measure resistance?
Ensure the circuit is de-energized and disconnected from any power source. Verify the test leads are securely connected and the object is not a broken wire. Also confirm you have selected the resistance (Ω) function.
How should I care for and store the multimeter?
Keep the device in a dry, dust-free environment. Wipe the housing and display with a soft, dry cloth. Remove the battery if storing for long periods. Do not expose to extreme temperatures or humidity.
User questions about 208-142 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 208-142 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 208-142 by Steren.
USER MANUAL 208-142 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : 208-142
Category : Uncategorized