Profile JKD915SFSS - Warming Drawer GE - Free user manual and instructions
Find the device manual for free Profile JKD915SFSS GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Warming Drawer |
| Brand | GE |
| Model | Profile JKD915SFSS |
| Finish | Stainless Steel |
| Installation | Built-in under counter or in cabinet |
| Approximate Dimensions (H × W × D) | 7.5 x 27 x 20 inches (with trim) |
| Approximate Cutout Width | 25.75 inches |
| Capacity | 1.9 cu ft (approx.) |
| Power Supply | 110–120 VAC, 60 Hz, 900 W |
| Temperature Range | 90°F to 200°F (32°C to 93°C) |
| Heat Settings | Low, Medium, High dial control |
| Control Type | Manual temperature knob |
| Interior | Stainless steel with rounded corners |
| Cooking Rack | One removable chrome-plated wire rack |
| Maximum Load | Up to 35 lbs (depending on distribution) |
| Drawer Glides | Full-extension telescopic ball bearings |
| Functions | Warm, proofing, china warming, plate warming |
| Cleaning | Wipe with damp cloth and mild soap; avoid abrasives |
| Safety Features | Quick cool-down zone, cool-touch exterior (when installed per manual) |
| Spare Parts & Repair | Genuine GE parts available; repair by a certified technician recommended |
| Warranty | 1-year manufacturer’s warranty |
Frequently Asked Questions - Profile JKD915SFSS GE
What can I use the GE Profile JKD915SFSS warming drawer for?
It is ideal for keeping food warm, proofing bread dough, and pre-warming plates. Set the temperature between 90°F and 200°F depending on the dish.
How do I know which temperature setting to use?
Use Low (~90-120°F) for proofing bread and keeping desserts warm; Medium (~140-160°F) for plates and casseroles; High (~200°F) for holding hot cooked meals. Let the drawer preheat 10-15 minutes.
Is the warming drawer hard-wired or plug-in?
It uses a standard 120V grounded outlet. The included power cord plugs into a dedicated 15-amp circuit. Do not use an extension cord.
Can I leave the warming drawer on overnight?
GE recommends not leaving it unattended for long periods. It does not have a timer, so turn it off after use. For food safety, do not keep food warm more than 2 hours.
How do I clean the stainless steel interior and exterior?
Wait until the drawer is cool and unplugged. Wipe with a soft cloth and warm soapy water. For fingerprints, use a stainless steel cleaner. Never use abrasive pads or oven cleaners.
Can I install the warming drawer under a cooktop?
Yes, it is designed for built-in installation under a cooktop or in a cabinet. Maintain a minimum clearance of 4 inches between the drawer top and cooktop for ventilation, and follow the installation guide.
How do I replace the heating element if it stops working?
The heating element is accessible inside the drawer. Purchase a genuine GE replacement element (part number in manual). Disconnect power, remove the mounting screws, and swap it. If unsure, call a licensed technician.
Does the drawer have an interior light?
No, the JKD915SFSS does not include an interior light. The manual does not list one. Keep the drawer content visible by not overloading the rack.
Can I use plastic containers in the drawer?
Only use oven-safe cookware. Plastic containers may melt at high temperatures. Always check the manufacturer's safe range.
What is the warranty coverage?
GE provides a 1-year limited warranty for parts and labor from the date of purchase. Keep the receipt; warranty applies to domestic use only.
User questions about Profile JKD915SFSS GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Warming Drawer in PDF format for free! Find your manual Profile JKD915SFSS - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Profile JKD915SFSS by GE.