NWSR483GBWW - Tumble dryer HOTPOINT - Free user manual and instructions
Find the device manual for free NWSR483GBWW HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Hotpoint |
| Model | NWSR483GBWW |
| Drying Type | Condenser |
| Loading Type | Front Load |
| Capacity | 8 kg |
| Energy Class | C (estimated) |
| Dimensions (H x W x D) | 85 x 59.5 x 60 cm |
| Net Weight | 35 kg |
| Power Supply | 220-240 V, 50 Hz |
| Rated Power | 2200 W |
| Number of Programmes | 16 |
| Drum Volume | 112 L |
| Drum Material | Stainless Steel |
| Sensor Drying | Yes, auto detect moisture |
| Delay Start | Yes (up to 24 hours) |
| Child Lock | Yes |
| Lint Filter | Cleaning indicator |
| Water Container | Removable top container |
| Maintenance | Clean filter after each cycle |
| Safety Features | Overheat protection, door lock |
| Spare Parts Availability | Authorized service centres |
| Repairability | Accessible heating element and door seal |
Frequently Asked Questions - NWSR483GBWW HOTPOINT
How do I clean the lint filter?
Open the door, pull the lint filter out, remove the fluff with your hands or a soft brush, and rinse under running water if needed. Dry it thoroughly before placing it back. Clean the filter after every drying cycle to maintain performance.
Can I install the dryer in a bathroom?
This condenser dryer does not require external venting, but it still needs good air circulation. Avoid installing it in a room where it will be exposed to water splashes or high humidity for prolonged periods.
How often should I empty the water container?
Empty the water container after each drying cycle or when the water tank indicator lights up. If you use a drain hose, the container can be left unattended.
What does the 'clean filter' indicator mean?
The indicator reminds you to clean the lint filter for optimal airflow and drying efficiency. Switch off the dryer, clean the filter, and restart the cycle.
How do I reverse the door?
The door is reversible. Unscrew the hinge brackets, move the door to the opposite side, and refit the brackets following the manual. Keep the screws secure to prevent door misalignment.
Why is my laundry still damp after a cycle?
Check if the load is too large, the lint filter is blocked, or the selected program is too delicate. Also ensure the water container is empty and the condenser unit (if accessible) is clean.
Can I dry delicate fabrics in this dryer?
Yes, use the delicate or low-heat programme. Always check garment care labels and avoid overloading to prevent damage.
How do I use the delay start function?
Press the Delay Start button repeatedly to set the desired delay (up to 24 hours). Select a drying programme, then confirm. The dryer will start automatically after the set time.
What should I do if the dryer stops mid-cycle?
First, empty the water tank and clean the lint filter. Check if the load is balanced and the door is properly closed. If the problem persists, consult the troubleshooting section of the manual.
Is the dryer vented or condenser?
This model is a condenser dryer. It extracts moisture from laundry and collects it in a water container, so it does not require an external vent.
User questions about NWSR483GBWW HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual NWSR483GBWW - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NWSR483GBWW by HOTPOINT.
USER MANUAL NWSR483GBWW HOTPOINT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HOTPOINT
Model : NWSR483GBWW
Category : Tumble dryer