GA622T - Network card NETGEAR - Free user manual and instructions
Find the device manual for free GA622T NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Network interface card (NIC) |
| Brand | NETGEAR |
| Model | GA622T |
| Interface type | PCI Express (PCIe) |
| Form factor | PCIe plug-in card with standard bracket |
| Ports | 1 x RJ-45 (10GBASE-T) |
| Data rate | 10 Gbps, 5 Gbps, 2.5 Gbps, 1 Gbps, 100 Mbps |
| Cable requirement | Cat6a or Cat7 cable (up to 100 meters) |
| Networking standards | IEEE 802.3an (10GBASE-T), 802.3ab (1000BASE-T), 802.3u (100BASE-TX) |
| LED indicators | Link and activity LEDs |
| Operating temperature | 0°C to 50°C |
| Storage temperature | -20°C to 70°C |
| Humidity range | 10% to 90% (non-condensing) |
| Power consumption | Typically 3W (low power design) |
| Dimensions | Approximately 120 mm x 75 mm (with bracket) |
| Weight | Approximately 100 g |
| Operating system support | Windows 10/11, Windows Server, Linux |
| Warranty | 3-year limited hardware warranty |
| Maintenance and cleaning | Use a dry cloth to clean the exterior; avoid liquid cleaners |
| Security | Wired connection; security managed through network software |
| Spare parts and repairability | No user-serviceable parts; contact NETGEAR technical support |
Frequently Asked Questions - GA622T NETGEAR
Is the NETGEAR GA622T compatible with Windows 10?
Yes, the GA622T supports Windows 10 and Windows 11. You can download the latest driver from the NETGEAR support website.
Does the GA622T support 10GBASE-T networking?
Yes, it supports 10GBASE-T with speeds up to 10 Gbps over Cat6a or Cat7 cables.
What type of cable is recommended for 10 Gbps performance?
For optimal performance, use Cat6a or Cat7 twisted pair cable. The maximum distance for 10GBASE-T is 100 meters.
Can I install the GA622T in a PCIe x1 slot?
The card is designed for PCIe x4, x8, or x16 slots. Installing it in a PCIe x1 slot may work but will limit speed to about 1 Gbps due to bus bandwidth.
How do I install the driver for the GA622T?
Insert the included CD or download the driver from the NETGEAR support site. In Windows, you can also run the installer and follow the on-screen steps to complete the installation.
Why is my link speed only 1 Gbps instead of 10 Gbps?
Check that your network switch/router supports 10GBASE-T and that you are using a Cat6a/Cat7 cable. Also ensure the adapter is properly seated in a PCIe x4 or larger slot.
Does the GA622T support Wake-on-LAN?
Yes, the GA622T supports Wake-on-LAN. You can enable it in the device manager and configure your operating system settings.
Will the GA622T work with my existing router?
The GA622T is backward compatible with 1 Gbps, 2.5 Gbps, and 5 Gbps network speeds, so it will work with standard routers. For full 10 Gbps, your router must have a 10GBASE-T port.
Is a low-profile bracket included?
The GA622T typically ships with a low-profile bracket for installation in slim or rack-mount chassis. Check the package contents in the manual.
How can I verify the current link speed of the adapter?
You can check the link speed in your operating system's network settings. In Windows, go to Network Connections, right-click the adapter, and select Status.
User questions about GA622T NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card in PDF format for free! Find your manual GA622T - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GA622T by NETGEAR.
USER MANUAL GA622T NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : GA622T
Category : Network card