DS508 - NAS NETGEAR - Free user manual and instructions
Find the device manual for free DS508 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Network Attached Storage (NAS) |
| Marque | NETGEAR |
| Modèle | DS508 |
| Catégorie | NAS |
| Dimensions | 220 × 180 × 230 mm (approx.) |
| Poids | 3.5 kg (approx.) |
| Alimentation | 100-240 V AC, 50/60 Hz |
| Processeur | 1.6 GHz Intel SoC |
| Mémoire vive (RAM) | 512 MB DDR2 |
| Baies de stockage | 5 baies compatibles SATA I/II |
| Réseau | 1× Gigabit Ethernet (10/100/1000) |
| Ports USB | 1× port USB 2.0 |
| Fonctions principales | Partage de fichiers, sauvegarde réseau, streaming multimédia, serveur FTP |
| Protocoles supportés | SMB/CIFS, AFP, NFS, FTP, HTTP/HTTPS |
| RAID supporté | RAID 0, 1, 5, 10, JBOD |
| Entretien et nettoyage | Nettoyer avec un chiffon sec et doux, éviter les produits abrasifs |
| Sécurité | Contrôle d'accès par utilisateur/groupes, cryptage AES 256 bits |
| Pièces détachées et réparabilité | Disques durs remplaçables à chaud, supports de montage inclus |
| Informations générales | Garantie fabricant 2 ans, ventilateur de refroidissement silencieux |
Frequently Asked Questions - DS508 NETGEAR
How do I set up my NETGEAR DS508 for the first time?
Connect the DS508 to your router via the Gigabit Ethernet port, then power it on. Insert hard drives into the bays, then open a web browser and go to http://
Which RAID levels are supported by the DS508?
The DS508 supports RAID 0 (striping), RAID 1 (mirroring), RAID 5 (distributed parity), RAID 10 (striped mirror), and JBOD for maximum flexibility.
Can I access my files remotely over the internet?
Yes, the DS508 features a built-in FTP server and supports HTTP/HTTPS access. For secure remote access, enable VPN or use port forwarding on your router, and connect via HTTPS.
How do I replace or add a hard drive?
The DS508 features hot-swappable drive bays. Simply pull out the failed drive, replace it with a new SATA HDD of the same or larger capacity, and push it back in. The RAID volume will automatically rebuild if configured with redundancy.
Is the DS508 compatible with both Windows and Mac?
Yes, the device supports SMB/CIFS and AFP protocols, making it accessible from Windows, macOS, and even Linux clients without installing additional software.
How do I perform a factory reset on the DS508?
Locate the reset button on the back of the unit. Use a paperclip to press and hold the button for 10 seconds until the power LED blinks. The device will restore its factory default settings and reboot.
Can I stream media to a TV or other devices?
Yes, the DS508 works as a DLNA media server. You can stream videos, photos, and music to smart TVs, game consoles, and media players on the same network.
How do I set up user permissions?
Through the web admin interface, go to Accounts and create users/groups. Then, assign read/write permissions to shared folders. Each user can have its own private folder.
What is the maximum storage capacity of the DS508?
With five SATA slots and support for large-capacity drives (up to 4 TB each), the DS508 supports a maximum raw capacity of 20 TB when using RAID 0 or JBOB (no redundancy).
How do I update the firmware?
Download the latest firmware file from the NETGEAR support site. In the web interface, go to System > Update, select the file, and click "Upload". The device will reboot automatically after the update.
User questions about DS508 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual DS508 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS508 by NETGEAR.
USER MANUAL DS508 NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : DS508
Category : NAS