SDI-EXTFIBERPRO - Receiver KanexPro - Free user manual and instructions
Find the device manual for free SDI-EXTFIBERPRO KanexPro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional HD-SDI Fiber Optic Receiver |
| Model Number | SDI-EXTFIBERPRO |
| Supported SDI Formats | 3G-SDI, HD-SDI, and SD-SDI signals |
| Fiber Connection | One SC fiber input (single-mode or multi-mode) |
| Video Output | 1x BNC loop-through output |
| Max Resolution | 1920x1080p @ 60Hz |
| Transmission Distance | Up to 10 km over single-mode fiber |
| Housing | Rugged aluminum enclosure with mounting brackets |
| Dimensions (W x H x D) | 134 x 25 x 95 mm |
| Weight | 450 g (approx.) |
| Power Supply | 5V DC / 1A power adapter included |
| Power Consumption | 3 W (max.) |
| Indicators | Power LED, Fiber Link LED, Video LED |
| Equalization & Reclocking | Automatic input equalization and reclocking |
| EDID Management | Automatic EDID bypass for transparent operation |
| Surge Protection | Built-in ESD and surge protection circuits |
| Operating Temperature | -20°C to +60°C |
| Compliance | CE, RoHS compliant |
| Maintenance & Cleaning | Keep fiber ports covered; clean enclosure with dry cloth |
| Repair Policy | No internal user-serviceable parts; contact certified support |
| Included Accessories | Power adapter, rack-mount kit, user manual |
Frequently Asked Questions - SDI-EXTFIBERPRO KanexPro
What is the KanexPro SDI-EXTFIBERPRO used for?
The SDI-EXTFIBERPRO is a professional fiber optic receiver designed to extend 3G-SDI/HD-SDI video signals over long distances without signal degradation. It is ideal for live events, broadcast studios, and AV installations.
How do I connect the receiver to a fiber optic SDI system?
Connect the incoming fiber optic cable to the SC input port. Then connect an SDI cable from the BNC output to your monitor or switcher. Apply power using the included adapter; the Power, Fiber Link, and Video LEDs will indicate the link status.
What is the maximum transmission distance?
With single-mode fiber, the receiver can accept signals from up to 10 kilometers away. When using multi-mode fiber, the distance is typically shorter (up to 500 m), depending on the SFP module installed.
Which fiber type should I use?
The SDI-EXTFIBERPRO supports both single-mode (OS1/OS2) and multi-mode (OM3/OM4) fibers. Single-mode is recommended for distances beyond 500 meters. Ensure the SFP module matches your fiber type.
Does it support 1080p60?
Yes, it supports 3G-SDI signals up to 1920x1080p @ 60Hz, as well as HD-SDI (1080i/720p) and SD-SDI (576i/480i) formats. The unit performs automatic equalization and reclocking for optimal signal integrity.
Is a power adapter included?
Yes, the product ships with a 5V DC/1A power adapter with standard international plug options. The adapter is CE certified and suitable for worldwide use with the appropriate plug adapter.
How do I troubleshoot no video signal?
First, verify that the Power LED is on. Check the Fiber Link LED – it should be solid green when the fiber connection is active. Ensure the BNC cable is terminated with 75-ohm impedance. Confirm the source outputs the correct SDI format and that all connectors are clean.
Can I extend the cable further with additional units?
For longer runs, you can use a fiber optic amplifier or place another transmitter-receiver pair in series. Because the connection is digital, the signal remains intact when retransmitted, but ensure reclocking occurs at each stage to maintain signal quality.
Is the unit rack-mountable?
Yes, the rugged enclosure comes with mounting brackets that allow it to be installed in a standard 19-inch rack (1U if paired with a half-rack shelf) or mounted under a table. The compact size makes it easy to integrate into existing AV furniture.
How do I clean and maintain the receiver?
Use a dry, soft cloth to wipe the exterior. For the fiber optic connector, remove the dust cap and clean the ferrule with a fiber optic cleaning pen or alcohol swab. Always keep the dust caps closed when not in use. No periodic alignment is required.
User questions about SDI-EXTFIBERPRO KanexPro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual SDI-EXTFIBERPRO - KanexPro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SDI-EXTFIBERPRO by KanexPro.
USER MANUAL SDI-EXTFIBERPRO KanexPro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KanexPro
Model : SDI-EXTFIBERPRO
Category : Receiver