PDU3XEVSR6G30B - Power Strip Tripp Lite - Free user manual and instructions
Find the device manual for free PDU3XEVSR6G30B Tripp Lite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switched Power Distribution Unit (PDU) |
| Model | PDU3XEVSR6G30B |
| Brand | Tripp Lite |
| Category | Power Strip / Power Distribution Unit |
| Input Phase | 3-phase |
| Input Voltage | 200-240 V AC |
| Input Current | 30 A maximum |
| Input Connection | IEC 309 30 A 3-phase plug |
| Output Receptacles | 6 x IEC 320 C19 |
| Power Capacity | Up to 12 kW at 230 V |
| Outlet Control | Individually switched outlets via network interface |
| Mounting | 0U vertical rackmount with toolless mounting buttons |
| Dimensions | 69.5 x 2.2 x 2.8 in (1765 x 56 x 71 mm) |
| Weight | Approx. 8 lb (3.6 kg) |
| Remote Monitoring | Ethernet/SNMP monitoring of current, voltage, and power |
| LED Display | Digital current meter with per-phase readout |
| Overload Protection | Built-in 30 A circuit breaker |
| Safety Compliance | UL, cUL, CE, RoHS |
| Cleaning | Wipe with a dry, soft cloth; do not use liquid or aerosol cleaners |
| Repairability | No user-serviceable parts; contact a qualified technician for service |
| Included Accessories | Mounting brackets, user manual |
Frequently Asked Questions - PDU3XEVSR6G30B Tripp Lite
What is the PDU3XEVSR6G30B used for?
The PDU3XEVSR6G30B is a switched power distribution unit designed to supply 3-phase AC power to multiple high-power devices in a data center or server rack. It provides remote control and monitoring of each outlet.
What input plug and voltage does the PDU require?
It uses a 30 A IEC 309 3-phase plug and is rated for 200-240 V AC. Ensure your building power supply matches these specifications before installation.
Can I turn off each outlet independently?
Yes, each of the six IEC C19 outlets can be switched on, off, and rebooted independently through the embedded web interface, SNMP, or other management protocols.
What is the maximum power capacity?
The PDU supports a maximum load of up to 12 kW at 230 V. At lower input voltages, the usable capacity is reduced; always check the load per phase.
How do I reset the circuit breaker?
If the load exceeds 30 A, the on-board circuit breaker may trip. Disconnect some loads, allow the breaker to cool, then press it back to the ON position.
How is the PDU mounted in a rack?
The unit is designed for 0U vertical rack mounting. Use the included toolless mounting buttons to attach it to the rack rail either on the front or rear.
What maintenance does this power strip need?
Periodically inspect the power cord and outlets for damage, wipe the exterior with a dry cloth, and verify that all connections are secure. Do not open the housing.
Can I monitor power usage remotely?
Yes, the network interface allows you to monitor voltage, current, power, and other parameters over Ethernet in real time, and set alarms for abnormal conditions.
Is there a warranty for the PDU3XEVSR6G30B?
Tripp Lite provides a limited warranty covering defects in materials and workmanship. Contact Tripp Lite support or register your unit to confirm the exact warranty period.
Can I use this on a single-phase installation?
No, the PDU3XEVSR6G30B requires 3-phase power input. Connect it only to a compatible 3-phase 200-240V circuit to avoid damage.
User questions about PDU3XEVSR6G30B Tripp Lite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Power Strip in PDF format for free! Find your manual PDU3XEVSR6G30B - Tripp Lite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PDU3XEVSR6G30B by Tripp Lite.
USER MANUAL PDU3XEVSR6G30B Tripp Lite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tripp Lite
Model : PDU3XEVSR6G30B
Category : Power Strip