TruVision TVN-2008 - Security Camera Interlogix - Free user manual and instructions
Find the device manual for free TruVision TVN-2008 Interlogix in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Model | TruVision TVN-2008 |
| Brand | Interlogix |
| Image Sensor | 1/2.8" CMOS progressive scan |
| Max Resolution | 1920 x 1080 pixels |
| Frame Rate | 25/30 fps |
| Lens Type | Fixed 2.8 mm / 4 mm |
| Field of View | Approximately 90° horizontal |
| Night Vision | IR LEDs with up to 20 m range |
| Video Compression | H.265, H.264, MJPEG |
| Network Interface | 10/100 Ethernet (RJ45) |
| Power Supply | 12V DC or PoE (802.3af) |
| Power Consumption | Max 6W |
| Dimensions | 70 x 60 x 120 mm |
| Weight | 350 g |
| Housing | Aluminum alloy, outdoor rated |
| Protection | IP67, IK10 |
| Storage | MicroSD card up to 128 GB |
| Main Functions | Motion detection, remote surveillance, two-way audio |
| Maintenance | Clean the lens with a soft dry cloth |
| Cleaning | Use mild detergent, avoid harsh chemicals |
| Safety | CE, FCC compliant |
| Spare Parts | Power adapter, mounting bracket, IR LEDs |
| Repairability | Replaceable lens and IR board |
| Operating Temperature | -30°C to +60°C |
| Warranty | 2 years |
Frequently Asked Questions - TruVision TVN-2008 Interlogix
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds using a paperclip. The camera will restart and restore all settings to factory defaults.
How can I access the live video stream?
Open a web browser and enter the camera's IP address. Log in with your credentials, then the live view will be displayed. You can also use the Interlogix app or VMS software.
What are the power requirements for the TVN-2008?
The camera accepts 12V DC input or Power over Ethernet (PoE 802.3af). Only one source is needed. Always use the included power adapter or a PoE switch.
How do I configure motion detection?
Access the camera's web interface, go to Motion Detection settings, enable it, and adjust the sensitivity and detection areas. You can also set up email alerts or push notifications.
Can the camera be used outdoors?
Yes, the TVN-2008 is rated IP67 for water and dust resistance, and IK10 for impact resistance, making it suitable for outdoor installation in harsh conditions.
How do I update the firmware?
Download the latest firmware from the Interlogix support website. In the web interface, go to Maintenance > Firmware Upgrade, choose the file, and follow the on-screen instructions.
What should I do if the camera goes offline?
Check the network cable and ensure PoE is working. Verify the camera's IP address and ping it from your network. Restart the camera and check the router's firewall settings.
How to clean the camera lens?
Use a soft, dry microfiber cloth to gently wipe the lens. Avoid using abrasive cleaners or solvents. If needed, use a 50/50 isopropyl alcohol and water solution.
Can I store recordings locally?
Yes, the camera has a MicroSD card slot that supports up to 128 GB. Insert a card and configure recording to the SD card in the web interface.
How do I mount the camera properly?
Use the included mounting bracket and screws. Attach the plate to a wall or ceiling, ensure it is level, then secure the camera to the plate. Adjust the angle for optimal coverage.
User questions about TruVision TVN-2008 Interlogix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual TruVision TVN-2008 - Interlogix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TruVision TVN-2008 by Interlogix.