AVC - Loudspeaker Fluance - Free user manual and instructions
Find the device manual for free AVC Fluance in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Loudspeaker |
| Brand | Fluance |
| Model | AVC |
| Category | Loudspeaker |
| Enclosure Type | Bass Reflex |
| Configuration | 2-Way |
| Driver Complement | 1 inch tweeter, 6.5 inch woofer |
| Frequency Response | 50 Hz - 20 kHz |
| Impedance | 8 Ohms |
| Sensitivity | 87 dB |
| Power Handling | 60 - 100 Watts RMS |
| Recommended Amplifier Power | 20 - 120 Watts per channel |
| Dimensions (H x W x D) | 368 x 216 x 267 mm |
| Weight | 6.3 kg per speaker |
| Connectivity | Wired binding posts |
| Finish | Wood grain vinyl |
| Cleaning | Wipe with a soft dry cloth |
| Safety | Keep away from moisture and heat sources |
| Spare Parts and Repairability | Contact Fluance customer support for replacement parts |
| General Information | Designed for stereo and home theater use |
Frequently Asked Questions - AVC Fluance
How do I connect my Fluance AVC speakers to an amplifier?
Connect the speaker wire from the amplifier's positive and negative terminals to the corresponding binding posts on the back of each speaker. Ensure a secure connection to avoid signal loss.
What amplifier power is recommended for the AVC loudspeakers?
Ideally, use an amplifier delivering between 20 and 120 watts per channel. The speakers handle up to 100 watts RMS, so avoid excessive power to prevent damage.
Can I use these speakers as part of a home theater system?
Yes, the AVC speakers work well in a home theater setup, especially as front left/right channels when paired with a center channel and subwoofer.
How should I position the speakers for optimal sound?
Place them at ear level when seated, and angle them slightly toward the listening position. Keep them away from walls to avoid bass boom, typically at least 20 cm from the wall.
How do I clean the speakers?
Use a soft, dry cloth to gently wipe the cabinet and drivers. Avoid using any chemical cleaners or water, as they may damage the finish or components.
Are the Fluance AVC speakers magnetically shielded?
The AVC loudspeakers are not magnetically shielded. If placed near a CRT television, keep a distance to avoid interference. For modern displays, this is less of a concern.
What is the frequency response of the AVC?
The speakers reproduce frequencies from 50 Hz to 20 kHz, offering a balanced mix of bass, midrange, and treble for accurate sound reproduction.
Can I bi-wire the speakers for better sound quality?
The AVC features single-wire binding posts, so bi-wiring is not supported. Instead, ensure high-quality speaker cables are used for the best performance.
What type of speaker wire should I use?
Use 16-gauge or thicker speaker wire for runs up to 15 meters. For longer distances, 14-gauge or thicker is recommended to minimize resistance.
Where can I find spare parts like a new tweeter or woofer?
Contact Fluance customer support or visit the official website to order replacement parts. Do not attempt to repair the drivers yourself, as it may void the warranty.
User questions about AVC Fluance
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual AVC - Fluance and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AVC by Fluance.
USER MANUAL AVC Fluance
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fluance
Model : AVC
Category : Loudspeaker