AcousticDesign AD-C1200 - Loudspeaker QSC - Free user manual and instructions
Find the device manual for free AcousticDesign AD-C1200 QSC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ceiling loudspeaker |
| Brand | QSC |
| Model | AcousticDesign AD-C1200 |
| Loudspeaker Type | Two-way, 12-inch ceiling loudspeaker |
| Woofer | 12-inch (305 mm) polypropylene cone with rubber surround |
| Tweeter | 1-inch (25 mm) compression driver with titanium diaphragm |
| Frequency Response | 55 Hz – 20 kHz (-10 dB) |
| Power Capacity | 200 W continuous / 800 W peak |
| Impedance | 8 Ω (bypass) or selectable 70V/100V transformer taps |
| Transformer Taps | 100V: 60, 30, 15, 7.5 W; 70V: 30, 15, 7.5, 3.75 W |
| Sensitivity (1 W @ 1 m) | 95 dB SPL |
| Maximum SPL | 122 dB peak |
| Nominal Coverage | 90° conical constant-directivity |
| Enclosure | Powder-coated steel backcan |
| Grille | Weather-resistant aluminum, painted white |
| Dimensions (D×H) | 398 × 282 mm (15.7 × 11.1 in) |
| Weight | 15.5 kg (34.2 lb) |
| Input Connectors | 4-pin Euroblock with loop-through |
| Mounting | Ceiling tile with included C-ring and screws |
| Suitable For | Indoor distributed audio, covered outdoor installations |
| Compliance | UL/CE, plenum rated per UL-2043 |
| Maintenance | Clean grille with damp cloth |
| Repairability | Replaceable grille, transformer, and driver modules |
| Included Accessories | C-ring, grille, Euroblock connectors |
Frequently Asked Questions - AcousticDesign AD-C1200 QSC
What is the power handling of the QSC AcousticDesign AD-C1200?
The AD-C1200 handles 200 W continuous and 800 W peak. When using 70V/100V systems, match the tap setting to the amplifier output.
How do I select the power tap on the transformer?
Use a flathead screwdriver to rotate the selector switch on the front of the speaker. Position it to the desired wattage for either 70V or 100V, or to the bypass position for 8Ω operation.
Can I use the AD-C1200 in an 8-ohm system?
Yes, set the transformer rotary switch to the bypass position. The speaker then presents an 8 ohm load to the amplifier.
What type of connector does the speaker have?
It uses a 4-pin Euroblock connector with loop-through terminals for daisy-chaining to multiple speakers.
How do I install the speaker in a ceiling tile?
Attach the included C-ring to the ceiling tile, insert the speaker into the ring, and tighten the four mounting screws. For extra support, an optional tile bridge may be used.
Is the grille paintable?
Yes, the grille can be painted to match the ceiling. Remove the grille, spray or brush with quality latex paint, and reattach.
What is the maximum ceiling thickness it can fit?
The backcan is designed to fit standard 2x2 feet drop ceiling tiles, which are typically 15–25 mm (0.6–1.0 inch) thick.
How can I avoid feedback in a room?
Apply proper speaker placement, maintain good distances from microphones, and use an equalizer to tame resonant frequencies. Also check that the selected power tap matches the amplifier level.
What amplifier power is recommended?
For 8Ω use, an amplifier rated 200 W RMS per channel is ideal. For constant-voltage systems, select an amplifier whose distributed output matches the chosen tap setting.
Does the AD-C1200 come with a manual?
Yes, the speaker includes a quick-start guide and the full user manual is available for download from the QSC website.
User questions about AcousticDesign AD-C1200 QSC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual AcousticDesign AD-C1200 - QSC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AcousticDesign AD-C1200 by QSC.
USER MANUAL AcousticDesign AD-C1200 QSC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : QSC
Model : AcousticDesign AD-C1200
Category : Loudspeaker