SDM-160P - Soundbar SAMSUNG - Free user manual and instructions
Find the device manual for free SDM-160P SAMSUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Soundbar |
| Brand | Samsung |
| Model | SDM-160P |
| Dimensions (W x H x D) | 900 x 55 x 80 mm |
| Weight | 1.8 kg |
| Power Output | 160 W |
| Total Power Consumption | 25 W |
| Standby Power Consumption | 0.5 W |
| Connectivity | Bluetooth, Optical, HDMI ARC |
| Supported Audio Formats | PCM, Dolby Digital |
| Sound Modes | Standard, Music, Movie, News |
| Remote Control | Included |
| Wall Mountable | Yes |
| Frequency Response | 60 Hz - 20 kHz |
| Signal-to-Noise Ratio | 75 dB |
| Driver Units | 2 Full-range + 1 Tweeter |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Cleaning | Wipe with a soft dry cloth |
| Safety Warnings | Do not expose to moisture or heat |
| Repair Information | Contact qualified service personnel |
Frequently Asked Questions - SDM-160P SAMSUNG
How do I connect the soundbar to my TV via HDMI ARC?
Connect one end of an HDMI cable to the HDMI ARC port on your TV and the other end to the HDMI OUT (ARC) port on the soundbar. Then press the Source button until HDMI mode is selected.
How can I pair the soundbar with my smartphone via Bluetooth?
Press the BT (Bluetooth) button on the soundbar or remote to enter pairing mode. On your smartphone, enable Bluetooth and select Samsung SDM-160P from the list of available devices.
What should I do if there is no sound from the soundbar?
First check that the soundbar is powered on and the volume is not muted. Verify that the correct audio input is selected. If using Bluetooth, ensure the device is paired. Also check that the TV audio output is set to External Speakers.
How do I wall mount the Samsung SDM-160P?
Use the wall mount bracket included in the box. Mark the screw positions on the wall, drill holes, and insert anchors. Attach the bracket securely, then slide the soundbar onto it. Ensure the soundbar is level and stable.
Can I control the soundbar with my TV remote?
If your TV supports HDMI CEC, enable the CEC feature on both devices. The TV remote can then control power, volume, and mute of the soundbar.
How do I clean the soundbar?
Unplug the soundbar before cleaning. Use a soft dry cloth to wipe the exterior and the speaker grille. Do not use liquid cleaners or sprays.
What is the best way to optimize sound for movies?
Press the Sound Mode button on the remote to cycle through modes. Select the Movie mode for enhanced surround effect and clearer dialogue.
How do I reset the soundbar to factory settings?
Turn off the soundbar. Then press and hold the Volume Up button for 5 seconds until the display shows 'INT'. This resets all settings to factory defaults.
Does the soundbar support optical cable connections?
Yes, the SDM-160P has an optical input. Connect an optical cable from your TV or audio source to the OPTICAL IN port on the soundbar and select the Optical source.
What is the power consumption in standby mode?
The soundbar consumes approximately 0.5 W in standby mode. To save power, unplug it if you won't use it for an extended period.
User questions about SDM-160P SAMSUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Soundbar in PDF format for free! Find your manual SDM-160P - SAMSUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SDM-160P by SAMSUNG.
USER MANUAL SDM-160P SAMSUNG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SAMSUNG
Model : SDM-160P
Category : Soundbar