FTGHL 751 D/EX/HA - Cooker HOTPOINT - Free user manual and instructions
Find the device manual for free FTGHL 751 D/EX/HA HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hotpoint |
| Model | FTGHL 751 D/EX/HA |
| Product type | Freestanding gas cooker |
| Energy source | Gas hob with electric oven |
| Number of burners | 5 |
| Hob ignition | Electric ignition |
| Oven type | Multifunction electric oven |
| Oven capacity | Approx. 96 liters |
| Oven functions | Conventional, fan-assisted, grill, defrost |
| Grill | Electric grill element |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Gas type | Natural gas (convertible to LPG) |
| Safety device | Flame failure on all burners |
| Controls | Mechanical knobs |
| Cleaning | Enamel interior, removable door |
| Dimensions (W x D x H) | 75 x 60 x 90 cm |
| Adjustable feet | Yes |
| Weight | Approx. 55 kg |
| Spare parts availability | Original parts for 10 years |
Frequently Asked Questions - FTGHL 751 D/EX/HA HOTPOINT
How do I ignite the gas burners?
Push the knob and turn it to the maximum flame symbol. Keep pressing for a few seconds to activate the electric ignitor. If the flame goes out, repeat and hold longer over the burner.
Why does a burner flame go out during cooking?
The flame failure device (thermocouple) may not be heated long enough. Hold the knob pressed for 5–10 seconds after ignition. Also check that the burner caps are correctly positioned and the flame openings are clean.
How do I use the oven in fan-assisted mode?
Select the fan symbol on the oven function dial, set the temperature with the thermostat knob, and preheat for about 10 minutes. Place the food on the middle shelf for even heat circulation.
Can I convert the cooker to use LPG?
Yes, the cooker is convertible to LPG. Replace the burner nozzles and adjust the air intake according to the instructions. For safety, request a qualified technician to perform the conversion.
How do I replace the oven light bulb?
Disconnect the cooker from the power supply. Access the bulb from the rear pane of the oven, remove the protective cover, unscrew the bulb and replace it with a high-temperature bulb (15W, 300°C). Reassemble and reconnect.
What should I do if the oven doesn't heat?
Check if the power supply is connected and the timer is not in automatic mode. Make sure the oven function and thermostat are set. If it still doesn't heat, the heating element may be defective; contact support.
How should I clean the hob?
Wait until the burners are cool. Remove the grates, caps and burners and wash them in warm soapy water. Clean the top surface with a damp cloth and mild detergent. Dry thoroughly before reassembling.
How do I clean the oven glass door?
Open the door, lock the hinges, and remove the inner glass pane after unscrewing the retaining clips (see manual). Wash with warm soapy water or a glass cleaner, dry, and refit. Avoid using abrasive sponges.
How do I set the clock and timer?
Press the clock function button until the time flashes, then use the + / – buttons to set the time. For a timed cooking, press the timer button to set duration, then choose the cooking function. The oven switches off automatically.
Where can I get spare parts or service?
Visit the Hotpoint spare parts portal or call their after-sales service. Provide the model and serial number (located on the rating plate) to find original parts for your cooker.
User questions about FTGHL 751 D/EX/HA HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cooker in PDF format for free! Find your manual FTGHL 751 D/EX/HA - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FTGHL 751 D/EX/HA by HOTPOINT.