ROCKFA62T - Loudspeaker Atlas Sound - Free user manual and instructions
Find the device manual for free ROCKFA62T Atlas Sound in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Outdoor rock loudspeaker |
| Brand | Atlas Sound |
| Model | ROCKFA62T |
| Driver type | 6.5-inch weather-resistant dynamic driver |
| Frequency response | 80 Hz to 20 kHz |
| Sensitivity | 91 dB SPL (1W/1m) |
| Continuous power handling | 30W at 8 ohms |
| Transformer taps | 1.25, 2.5, 5, 10, 20W at 70V/100V |
| Impedance (bypass mode) | 8 ohms |
| Dimensions (approx.) | 280 mm width x 320 mm height |
| Weight | 5.4 kg |
| Enclosure material | Molded rock-textured polyethylene |
| Weatherproof rating | IP66 (splash-proof, dust-tight) |
| Operating temperature | -20°C to +60°C |
| Mounting options | Surface mount or ground placement |
| Connections | Screw terminal (barrier strip) |
| Coverage angle | 100° conical |
| Cleaning | Wipe with a soft, dry cloth; do not use water jets |
| Safety | Do not exceed rated power; ensure secure mounting to prevent falling |
| Repairability | Replaceable driver and transformer; rear-panel access |
| General | For commercial paging and background music in outdoor spaces |
Frequently Asked Questions - ROCKFA62T Atlas Sound
How do I set the power tap on the ROCKFA62T?
The ROCKFA62T features a multi-tap transformer. Use a flat-head screwdriver to rotate the tap selector to the desired wattage (e.g., 5, 10, or 20W) for 70V/100V systems. For direct 8-ohm operation, select the '8Ω' bypass position.
Can I use this speaker with a standard home amplifier?
Yes, the ROCKFA62T can be used with a regular home amplifier by setting the tap selector to the 8-ohm bypass mode. Ensure the amplifier output power does not exceed the speaker's 30W continuous rating.
What is the dispersion angle of the speaker?
The speaker provides a 100° conical coverage, making it suitable for wide-area sound dispersion in gardens, patios, and walkways.
Is the ROCKFA62T fully weatherproof?
Yes, it is rated IP66, meaning it is dust-tight and protected against strong water jets. It can withstand rain, snow, and humidity, but avoid submerging it in water.
How should I mount this rock speaker?
The ROCKFA62T can be placed directly on the ground, partially buried for stability, or mounted on a flat surface using the optional bracket. Ensure it is firmly positioned to prevent tipping.
How do I wire multiple speakers in a 70V system?
In a 70V system, connect all speakers in parallel. Sum the total wattage from each tap and ensure it does not exceed the amplifier's output rating. Use the correct polarity to maintain consistency.
What type of wire is recommended?
For runs up to 150 feet, use 18 AWG two-conductor speaker wire. For longer runs or higher power, use 16 AWG or thicker to minimize signal loss.
Can the grille be removed for cleaning?
The speaker grille is fixed and not user-removable. Clean the exterior with a soft, dry cloth. Avoid using water or solvents, as they may damage the weatherproof seal.
Are replacement parts available?
Yes, the driver and transformer are replaceable. Contact Atlas Sound customer service for genuine parts. Access is gained through the rear terminal panel.
Is this speaker suitable for direct sunlight?
Yes, the UV-stabilized rock enclosure is designed to withstand prolonged exposure to sunlight without cracking or fading, making it ideal for sunny outdoor locations.
User questions about ROCKFA62T Atlas Sound
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual ROCKFA62T - Atlas Sound and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ROCKFA62T by Atlas Sound.