KGIS 1167 A++ - Refrigerator BAUKNECHT - Free user manual and instructions
Find the device manual for free KGIS 1167 A++ BAUKNECHT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Refrigerator-Freezer |
| Model | KGIS 1167 A++ |
| Brand | Bauknecht |
| Energy Efficiency Class | A++ |
| Total Net Capacity | 307 L |
| Refrigerator Net Capacity | 210 L |
| Freezer Net Capacity | 97 L |
| NoFrost Technology | Yes (both compartments) |
| Cooling System | Ventilated (dynamic cooling) |
| Control Type | Electronic with external display |
| LED Lighting | Yes, in fridge and freezer compartments |
| Dimensions (H × W × D) | 177.5 × 54.1 × 54.6 cm |
| Height Adjustable Feet | Yes |
| Reversible Door | Yes (right or left hinge) |
| Net Weight | 60 kg |
| Power Supply | 220-240 V AC |
| Frequency | 50 Hz |
| Climate Class | SN-T (temperate to tropical) |
| Freezer Star Rating | 4 stars |
| Noise Level | 35 dB(A) |
| Maintenance | Annual condenser cleaning recommended |
| Repairability Index | 8.1 / 10 |
| Spare Parts Availability | 10 years |
Frequently Asked Questions - KGIS 1167 A++ BAUKNECHT
How do I change the door swing on my KGIS 1167 A++?
To reverse the door swing, you will need a Torx screwdriver and an open-end spanner. First, unplug the refrigerator and empty it. Remove the top hinge cover, unscrew the hinges, and lift the door off. Move the pin to the opposite side, reattach the door, and secure the hinges. Finally, adjust the feet to level the appliance. For detailed steps, refer to the installation manual.
What is the proper temperature setting?
For optimal food preservation, set the refrigerator compartment to 4°C and the freezer to -18°C. Use the electronic control panel to adjust these settings. In warm weather, you may temporarily lower the temperature, but remember to reset it after 24 hours.
Why is my refrigerator making unusual noises?
Some noise is normal: the compressor, cooling fans, and refrigerant flow produce sounds. However, a loud or rattling noise may indicate the appliance is not level or parts are touching the wall. Make sure the fridge is placed on a stable floor and that the back is free of obstructions. If noise persists, contact customer service.
How often should I defrost the NoFrost system?
The NoFrost system defrosts automatically, so manual defrosting is not required. The appliance periodically heats the evaporator to melt frost, then drains water to a pan. You only need to clean the freezer occasionally.
What should I do if the fridge is not cooling properly?
Check the following: the temperature setting, whether the door seals are intact, and if the condenser coils are dusty. Also ensure the ventilation grills are not blocked. If the problem persists, the thermostat or compressor may be faulty; contact a technician.
How do I replace the LED light bulb?
This model uses LED lights that are energy-efficient and long-lasting. If the light fails, the entire LED module must be replaced by a qualified professional. Do not attempt to open the light cover yourself, as you may damage the electrical components.
Can I install this refrigerator myself?
Yes, a DIY installation is possible if you follow the instructions carefully. You need enough clearance for ventilation and a level floor. However, for built-in installation in a kitchen unit, it is recommended to have two people due to the weight. Always disconnect from the power supply before moving.
How do I clean the condenser coils?
Unplug the refrigerator and access the coils at the back or behind a hatch. Use a soft brush or a vacuum cleaner with a brush attachment to remove dust. Clean the coils every 6 to 12 months to maintain efficiency.
What does the climate class SN-T mean?
The climate class indicates the ambient temperature range in which the appliance operates correctly. SN-T means that the fridge can operate in environments from +10°C (subnormal) to +43°C (tropical). This ensures reliable performance in most climates.
Is the KGIS 1167 A++ a built-in or freestanding appliance?
The KGIS 1167 A++ is designed as a built-in refrigerator-freezer, intended to be integrated into a kitchen cabinet. It features a flush-fit design and a door panel that can be customized. It can also be used freestanding, but allow adequate gap around the appliance for ventilation.
User questions about KGIS 1167 A++ BAUKNECHT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Refrigerator in PDF format for free! Find your manual KGIS 1167 A++ - BAUKNECHT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KGIS 1167 A++ by BAUKNECHT.
USER MANUAL KGIS 1167 A++ BAUKNECHT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BAUKNECHT
Model : KGIS 1167 A++
Category : Refrigerator