FP937S - Screen BENQ - Free user manual and instructions
Find the device manual for free FP937S BENQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 19-inch TFT LCD monitor |
| Display Size | 19 inches (48.26 cm) viewable area |
| Native Resolution | 1280 x 1024 pixels (SXGA) |
| Aspect Ratio | 5:4 |
| Brightness | 300 cd/m² (typical) |
| Contrast Ratio | 600:1 (typical) |
| Response Time | 12 ms (rise + fall) |
| Viewing Angles | 160° horizontal / 160° vertical |
| Display Colors | 16.2 million colors |
| Video Inputs | Analog D-Sub (VGA) and digital DVI-D |
| Power Supply | 100–240V AC, 50–60 Hz auto-switching |
| Power Consumption | 45W (typical), less than 2W in standby mode |
| Dimensions (with stand) | 436 mm x 424 mm x 213 mm (W x H x D) |
| Weight (with stand) | 5.5 kg |
| Tilt Adjustment | -5° to +20° |
| VESA Mount Compatibility | 100 mm x 100 mm standard |
| Cleaning Instructions | Use a soft, dry, lint-free cloth; do not apply liquids directly. Water-dampened cloth for stubborn spots. |
| Safety Features | Kensington lock slot, TCO certified, complies with CE and FCC |
| Spare Parts & Repairability | Sealed unit; internal components not user-serviceable. Best handled by certified technicians. |
| General Information | Suited for office and multimedia applications; features a compact design with easy OSD controls. |
Frequently Asked Questions - FP937S BENQ
What is the native resolution of the BenQ FP937S?
The native resolution is 1280 x 1024 pixels, which corresponds to SXGA. For the sharpest image, set your computer to this resolution.
How should I clean the screen safely?
Turn off the monitor, then use a soft, dry cloth to remove dust. For stubborn marks, lightly dampen the cloth with water. Never use harsh chemicals or spray liquids directly onto the screen.
Can I mount the FP937S on a wall?
Yes, it supports VESA 100x100 mm mounting. You will need a compatible VESA mount bracket, which attaches to the rear of the monitor.
What should I do if the screen flickers?
First, check all cable connections and ensure your graphics card output matches the monitor's resolution and refresh rate. If the issue persists, try restoring the monitor to factory defaults via the on-screen menu.
How can I adjust the display settings?
Use the On-Screen Display (OSD) buttons located on the monitor bezel. You can adjust brightness, contrast, color balance, and other parameters through the OSD menu.
Does the monitor support digital DVI input?
Yes, the FP937S is equipped with both DVI-D and VGA (D-Sub) inputs. Use the DVI connection for a purely digital signal and better image quality.
What is the power consumption of this monitor?
Typical power consumption is around 45 watts. In standby mode, it draws less than 2 watts, making it relatively energy-efficient for its size.
Are there built-in speakers?
No, the BenQ FP937S does not have built-in speakers. It is a pure display; you need separate speakers for audio output.
What if there are dead pixels on my screen?
Dead pixels can occur on LCD panels. Check if your monitor falls within the manufacturer's dead pixel policy. Usually, a few isolated dead pixels are acceptable. If many are present, contact BenQ support for warranty service.
How do I enable power-saving mode?
The monitor automatically enters standby mode when no signal is detected. You can configure power-saving options through your computer's power management settings. The OSD also includes a power-saving menu.
User questions about FP937S BENQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screen in PDF format for free! Find your manual FP937S - BENQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FP937S by BENQ.