PSS27SHNBS - Refrigerator GE - Free user manual and instructions
Find the device manual for free PSS27SHNBS GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | French Door Bottom Freezer Refrigerator |
| Brand | GE Appliances |
| Model | PSS27SHNBS |
| Total Capacity | 27.0 cubic feet |
| Fresh Food Capacity | 18.1 cubic feet |
| Freezer Capacity | 8.9 cubic feet |
| Height | 70.25 inches (with hinge) |
| Width | 35.75 inches |
| Depth | 33.75 inches (with handle) |
| Weight | 375 pounds |
| Power Supply | 120V, 60Hz, 15A dedicated circuit |
| Energy Star Rated | Yes |
| Defrost Type | Automatic |
| Control Type | Internal digital display |
| Lighting | LED interior lighting |
| Water Filtration | GE RPWFE water filter |
| Ice Maker | Factory-installed, with water dispenser |
| Shelving | Adjustable spill-proof glass shelves |
| Crisper Drawers | Two humidity-controlled crisper drawers |
| Freezer Organization | Slide-out freezer shelves and wire baskets |
| Door Storage | Adjustable door bins |
| WiFi Connectivity | GE SmartHQ enabled |
| Installation | Professional installation recommended |
| Cleaning | Use mild detergent and water; avoid abrasive cleaners |
| Spare Parts/Repairability | Key parts like filters, shelves, and ice maker motor are replaceable |
Frequently Asked Questions - PSS27SHNBS GE
How do I replace the water filter on my GE PSS27SHNBS?
To replace the water filter, locate the filter in the upper right corner of the fresh food section. Twist the old filter counterclockwise to remove it, then insert the new GE RPWFE filter and turn clockwise until the knob locks. Run water through the dispenser for about 3 minutes to purge air and verify no leaks.
How do I adjust the temperature settings on the refrigerator and freezer?
Use the internal digital display on the control panel. Press the Fridge or Freezer buttons to adjust setpoints. The recommended settings are 37°F (2.8°C) for the fresh food section and 0°F (-18°C) for the freezer. Wait up to 24 hours for the temperature to stabilize.
How do I turn off the ice maker if I don't need it?
If your ice maker has a power switch, lower it to the OFF position. For models with a door-mounted control, press the Ice Maker button or navigate to the settings menu on the display. Remember to empty the ice bin and turn the icemaker back on when you need ice again.
How do I clean the condenser coils to maintain efficiency?
Unplug the refrigerator and pull it away from the wall. Remove the lower grille and use a vacuum with a brush attachment to gently remove dust from the coils. Clean the coils every 6 to 12 months, or more often if pets are in the home, to ensure efficient operation.
What is the recommended temperature for the refrigerator and freezer?
For optimal food preservation, set the fresh food compartment to 37°F (2.8°C) and the freezer to 0°F (-18°C). These temperatures slow bacterial growth and keep foods safe. Always use a separate appliance thermometer to verify actual temperatures.
How do I troubleshoot the water dispenser not working?
First, ensure the water line is connected and the shutoff valve is open. Check if the water filter is clogged and replace it if it is over 6 months old. Place a glass against the dispenser paddle; if still no water, the water inlet valve may be defective and require replacement.
How do I change the interior light bulb in this refrigerator?
The GE PSS27SHNBS uses LED lighting, which typically does not need replacement. If the LED module fails, it must be replaced by a trained technician. Since LEDs are integrated, there is no user-replaceable bulb. Contact GE service for assistance.
How do I install the door handles on this refrigerator?
To install or reattach handles, align the handle ends with the pre-drilled screw holes on the door. Secure the lower screw first, then the upper screw loosely, and tighten fully after adjusting level. Make sure the handle sits flush against the door gasket to prevent air leaks.
How do I activate vacation mode to save energy?
Vacation mode reduces energy use while you are away. On the control panel, press the Vacation button or access the settings menu. This mode raises the fridge temperature slightly while keeping the freezer at safe levels, minimizing frost buildup and energy usage.
How do I connect the refrigerator to Wi-Fi?
To use GE SmartHQ, download the app on your smartphone and follow the setup prompts. Ensure the refrigerator is within range of your 2.4GHz Wi-Fi network. In the app, select 'Add Appliance', scan for the fridge, and enter your network password to complete the connection.
User questions about PSS27SHNBS GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Refrigerator in PDF format for free! Find your manual PSS27SHNBS - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSS27SHNBS by GE.
USER MANUAL PSS27SHNBS GE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GE
Model : PSS27SHNBS
Category : Refrigerator