P-65B - Loudspeaker Sound Ordnance - Free user manual and instructions
Find the device manual for free P-65B Sound Ordnance in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2-Way Bookshelf Loudspeaker |
| Brand | Sound Ordnance |
| Model | P-65B |
| Design | Bass Reflex with Front-Firing Port |
| Dimensions (H x W x D) | 12.5 x 7.5 x 8.5 inches (31.8 x 19.1 x 21.6 cm) |
| Weight | 8 lbs (3.6 kg) each |
| Sensitivity | 88 dB (2.83V/1m) |
| Frequency Response | 55 Hz - 20 kHz |
| Impedance | 8 Ohms |
| Power Handling | 75 W RMS / 150 W Peak |
| Recommended Amplifier Power | 10 - 100 W RMS |
| Tweeter | 1-inch Silk Dome |
| Woofer | 6.5-inch Polypropylene Cone |
| Crossover Frequency | 2.5 kHz |
| Connectors | 5-Way Gold-Plated Binding Posts |
| Grille | Removable Cloth Grille |
| Cabinet Finish | Black Vinyl |
| Magnetic Shielding | No |
| Accessories Included | 8 Rubber Feet, Manual |
| Care | Wipe with a soft, dry cloth |
| Repairability | Replacement drivers and parts available |
Frequently Asked Questions - P-65B Sound Ordnance
How do I connect the Sound Ordnance P-65B to my amplifier?
Use the 5-way binding posts on the back of the speaker. Strip the wire, insert into the post, and tighten. Ensure the amplifier is turned off during connection. Match the positive and negative terminals correctly.
What is the optimal placement for the P-65B speakers?
Place them on a sturdy bookshelf or stand at ear level. Keep them at least 12 inches from walls to avoid bass boom. Angle them slightly toward the listening position for the best stereo imaging.
Can the P-65B be used as rear surround speakers?
Yes, they work well as surround speakers in a home theater setup. Use a compatible amplifier with a surround output and set them to the proper channel configuration.
How do I clean the speakers safely?
Wipe the cabinet and grille with a soft, dry microfiber cloth. Do not use water, solvents, or abrasive cleaners. Avoid touching the driver cones.
What warranty does Sound Ordnance provide for the P-65B?
Sound Ordnance provides a 1-year limited warranty on parts and labor. Keep proof of purchase and register your product online if possible.
Are the P-65B speakers magnetically shielded?
No, they are not magnetically shielded. Keep them away from CRT televisions and magnetic storage media to avoid interference.
What gauge speaker wire should I use?
For runs under 25 feet, use 16-gauge wire. For longer runs, use 14-gauge or thicker to minimize signal loss.
Can I bi-wire the P-65B?
The binding posts are not configured for bi-wiring; they are a single pair. Use a standard single-wire connection.
How do I remove the cloth grille?
Gently pull the grille away from the cabinet, starting from one corner. It is held in place with pegs; do not pry with tools to avoid damage.
What should I do if one speaker produces no sound?
Check the speaker wiring, ensuring the positive and negative connections are secure. Swap the speakers to see if the issue follows the speaker or the channel. If the problem persists, contact Sound Ordnance support.
User questions about P-65B Sound Ordnance
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual P-65B - Sound Ordnance and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P-65B by Sound Ordnance.
USER MANUAL P-65B Sound Ordnance
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sound Ordnance
Model : P-65B
Category : Loudspeaker