Supermicro

370SLA - Motherboard Supermicro - Free user manual and instructions

Find the device manual for free 370SLA Supermicro in PDF.

📄 90 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Supermicro 370SLA - page 23
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Motherboard
Brand Supermicro
Model 370SLA
Form Factor ATX
Socket Type Intel Socket 370
Supported Processors Intel Pentium III and Celeron
Chipset Intel 440BX
Memory Slots 4 DIMM
Supported Memory PC100 SDRAM
Maximum Memory 1 GB
Expansion Slots 5 PCI, 1 AGP
Storage Interfaces Ultra ATA/66
USB Ports 2x USB 1.1
Power Connector ATX 20-pin
BIOS Flash BIOS (Award)
Onboard Audio AC'97 (optional)
Dimensions 305 x 244 mm (12 x 9.6 inches)
Weight Approx. 1.2 kg (2.6 lbs)
Operating Temperature 0°C to 55°C
Maintenance & Cleaning Use a dry, anti-static cloth; keep vents free from dust.
Safety Precautions Disconnect power before installation; use anti-static protection.
Spare Parts & Repairability CPU, RAM, and CMOS battery are replaceable; consult manual for procedures.

Frequently Asked Questions - 370SLA Supermicro

What CPU types are compatible with the 370SLA?
The 370SLA supports Intel Pentium III and Celeron processors in the Socket 370 format. It is designed for older 100 MHz FSB CPUs.
How much memory can the motherboard support?
It has four DIMM slots and supports a maximum of 1 GB of PC100 SDRAM. Use unbuffered ECC or non-ECC memory for best results.
Does the board include onboard graphics?
No, the 370SLA does not have integrated video. You need a separate AGP or PCI graphics card.
How do I clear the CMOS password?
Power off and unplug the board, move the CMOS jumper from normal to clear position for a few seconds, then restore. Alternatively, remove the CMOS battery for 10 minutes.
What should I do if the system does not POST?
Check that the CPU, RAM and graphics card are firmly seated. Verify the ATX power cable is connected and the motherboard is properly grounded. Try resetting the CMOS.
Can I use a modern power supply?
Yes, but you will need a 20-pin to 24-pin adapter if the PSU lacks the older 20-pin connector. Ensure the PSU provides adequate 3.3V and 5V output.
How can I update the BIOS?
Download the latest BIOS from the Supermicro website. Use a bootable floppy or USB flash drive with the BIOS utility, and follow the manual's flashing instructions.
What expansion slots are available?
The motherboard provides 5 PCI slots and 1 AGP slot for graphics cards. There are no ISA slots on this model.
How to clean the motherboard safely?
Disconnect power and use a dry, anti-static cloth to remove dust. For stubborn dirt, use isopropyl alcohol and a lint-free cloth. Do not use water.
Is the motherboard suitable for a small form factor case?
No, the 370SLA is a full-size ATX board measuring 305x244 mm. It requires an ATX case with proper mounting points.

User questions about 370SLA Supermicro

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Motherboard in PDF format for free! Find your manual 370SLA - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 370SLA by Supermicro.

USER MANUAL 370SLA Supermicro

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Supermicro

Model : 370SLA

Category : Motherboard