FS-RF-2008-U - Inverter APC - Free user manual and instructions
Find the device manual for free FS-RF-2008-U APC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Inverter / Uninterruptible Power Supply (UPS) |
| Brand | APC |
| Model | FS-RF-2008-U |
| Rated Power | 2000 VA / 1200 W |
| Input Voltage | 220-240 V AC |
| Output Voltage | 220-240 V AC (regulated) |
| Frequency | 50/60 Hz |
| Battery Type | Maintenance-free sealed lead-acid |
| Battery Capacity | 12 V / 7 Ah (x2 internal) |
| Transfer Time | 2-6 ms |
| Output Waveform | Simulated sine wave |
| Number of Outlets | 8 x C13 sockets |
| Display | LCD status panel with LEDs |
| Communication Port | USB and serial (RS-232) |
| Overload Protection | Internal circuit breaker |
| Cooling | Thermostatically controlled fan |
| Dimensions (L x W x H) | 440 x 430 x 210 mm |
| Weight | 25 kg |
| Operating Temperature | 0 to 40 °C |
| Maintenance | Clean with dry cloth; inspect battery annually |
| Safety Features | Over-voltage, short-circuit, over-temperature protection |
| Spare Parts | Replacement battery pack and cooling fan available |
| Warranty | 2 years (1 year for battery) |
| Certifications | CE, TUV, VDE |
Frequently Asked Questions - FS-RF-2008-U APC
Can I connect this APC FS-RF-2008-U to a computer?
Yes, the APC FS-RF-2008-U has USB and serial communication ports that allow you to connect it to a computer for automatic shutdown and monitoring via PowerChute software.
How long will the battery last during a power outage?
Battery runtime depends on the connected load. At full load, it provides approximately 5 minutes; at half load, it can last up to 15 minutes. For longer runtimes, you can add external battery packs (if supported).
How do I replace the battery?
The battery is user-replaceable. Disconnect the UPS, remove the front panel, detach the battery connectors, and slide out the old battery. Install a genuine APC replacement battery and reconnect. Always dispose of old batteries properly.
What does the beeping sound mean?
Different beep patterns indicate conditions: continuous beep when on battery, beep every 2 seconds for low battery, and long beep for overload. Refer to the manual for the exact pattern. The LCD also displays status codes.
Can I plug a laser printer into this UPS?
Laser printers have high inrush current and can overload the UPS. It is recommended to connect only computer loads such as PCs, monitors, and network equipment, not printers, to avoid tripping the circuit breaker.
How do I perform a self-test?
Press and hold the TEST button for 2 seconds. The UPS will run a self-test on the battery and display the result on the LCD. If the battery is faulty, an error code will appear.
Is the unit rack-mountable?
Yes, the FS-RF-2008-U is both tower and rack-mountable. It includes brackets to fit standard 19-inch racks, occupying 2U of space.
How should I maintain the UPS?
Keep the vents clean and free of dust. Use a dry cloth to clean the exterior. Check the battery every 6 months and replace every 3-5 years. Ensure operating temperature is between 0 and 40°C.
What should I do if the UPS overloads?
Remove some connected equipment to reduce the load below the rated wattage. Press the RESET button to reset the circuit breaker. The UPS will resume normal operation once the load is reduced.
Can I connect external batteries?
Depending on the model, external battery packs (such as APC APCRBC series) can be connected via a dedicated port. That expands the runtime. Check the manual for compatibility and maximum number of packs.
User questions about FS-RF-2008-U APC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual FS-RF-2008-U - APC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FS-RF-2008-U by APC.