XNV-6081V - Security Camera Hanwha - Free user manual and instructions
Find the device manual for free XNV-6081V Hanwha in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Dome Security Camera |
| Brand | Hanwha |
| Model | XNV-6081V |
| Image Sensor | 1/2.8" 2MP CMOS Sensor |
| Max Resolution | 1920x1080 (1080p) |
| Lens Type | Fixed 2.8mm lens |
| Horizontal Field of View | 108° |
| Night Vision | IR range up to 30m with Smart IR |
| Video Compression | H.265, H.264, MJPEG |
| Audio | Two-way audio via external mic/speaker |
| Network | Ethernet 10/100, PoE IEEE 802.3af |
| Storage | MicroSD slot up to 256GB |
| Ingress Protection | IP66 rated for outdoor use |
| Vandal Resistance | IK10 certified housing |
| Power Supply | PoE (802.3af) or 12V DC |
| Dimensions | 137mm (D) x 102mm (H) |
| Weight | 0.9 kg (2.0 lbs) |
| Operating Temperature | -20°C to 50°C |
| Maintenance | Clean dome with soft dry cloth, ensure vents are clear |
| Security | AES encryption, HTTPS, IP filtering |
Frequently Asked Questions - XNV-6081V Hanwha
How do I reset the Hanwha XNV-6081V camera to factory defaults?
Press and hold the reset button located on the side of the camera for at least 5 seconds using a pointed tool until the device reboots. This restores all settings to factory defaults.
What is the correct installation process for the XNV-6081V?
Mount the bracket to a solid wall, connect the Ethernet cable with PoE, adjust the camera head to the desired angle, and tighten the screws. Use the included drilling template and ensure the housing is sealed for IP66 protection.
Can this camera be used outdoors in harsh weather?
Yes, it has an IP66 rating, meaning it is dust-tight and protected against powerful water jets. Its operating range is from -20°C to 50°C, making it suitable for rain, snow, and high heat.
Which software is recommended for viewing and managing the camera?
Use the Hanwha Wisenet WAVE application or the built-in web viewer. For mobile access, install the Wisenet WAVE mobile app or configure the camera with Hanwha NVR systems.
How do I set up motion detection on this camera?
Access the camera's web interface, go to Event > Motion Detection, enable the feature, and draw detection regions. Adjust sensitivity and threshold to avoid false alarms, and link recording or alerts.
Does the XNV-6081V support local recording via microSD?
Yes, insert a microSD card up to 256GB into the slot on the camera. Then configure recording schedule and backup settings in the camera's Storage menu.
How should I clean and maintain the camera?
Use a soft, dry, lint-free cloth to gently wipe the dome lens. Do not apply solvents or abrasive cleaners. Periodically check cable connections and fasteners, and clear any debris from the housing vents.
What PoE injector or switch do I need?
The camera supports IEEE 802.3af PoE (Power over Ethernet). Any compliant PoE switch or injector will supply power and network data through a single Ethernet cable.
How can I upgrade the firmware on the XNV-6081V?
Download the latest firmware file from the Hanwha Techwin website, open the camera's web page, go to System > Upgrade, browse to the downloaded file, and upload it. Do not disconnect power during the update.
What should I check if the camera shows no network connection?
Verify that the Ethernet cable is properly connected and that the switch port is active. Confirm PoE power is being provided. Also check the camera's IP address using Hanwha's IP utility tool, and ensure your computer is on the same subnet.
User questions about XNV-6081V Hanwha
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual XNV-6081V - Hanwha and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XNV-6081V by Hanwha.