Lumen 22447 - Headphones TRUST - Free user manual and instructions
Find the device manual for free Lumen 22447 TRUST in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Trust |
| Model | Lumen 22447 |
| Product Type | Headphones |
| Configuration | Over-ear |
| Connectivity | 2x 3.5 mm jacks (PC splitter) + USB |
| Cable Length | 2.2 m |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 Ohm |
| Sensitivity | 95 dB |
| Microphone | Yes, flexible boom |
| Microphone Frequency | 100 Hz - 10 kHz |
| Microphone Sensitivity | -40 dB |
| LED Lighting | Yes, via USB |
| Inline Controls | Volume wheel, mute switch |
| Compatibility | PC, PlayStation, Xbox, Nintendo Switch, mobile devices |
| Dimensions (W x H x D) | 190 x 200 x 85 mm |
| Weight | 280 g |
| Power Supply | USB 5V (for LED) |
| Warranty | 24 months |
| Package Contents | Headset, quick start guide |
Frequently Asked Questions - Lumen 22447 TRUST
How do I connect my Trust Lumen 22447 headphones to a PC?
Use the PC splitter cable (if included) or directly connect the 3.5mm jack to the headphone port. For the LED lighting, connect the USB plug to a powered USB port. Ensure the microphone mute switch is in the correct position.
The sound is low or distorted. What can I do?
Check the volume level on the inline controller and in the OS. Ensure the jack is fully inserted. For stereo, use the splitter connector for separate mic and headphone ports. Also, verify the audio is not set to mono.
How do I adjust the microphone?
The microphone is attached to the headset. You can rotate the flexible boom to position it near your mouth. Use the inline mute switch to turn it on or off. For best performance, keep it 2-3 cm from your mouth.
Can I use this headset with my PlayStation 4?
Yes, the 3.5mm jack is compatible with the PS4 controller. Connect the headset to the controller and adjust the audio/chat volume from the PS4 accessory settings.
How do I enable the LED lights?
The LED lighting automatically activates when the USB connector is plugged in. There is no switch; simply connect the USB cable to a powered port. Lights can be steady or cycling depending on model.
How to clean the headphones?
Disconnect the headset from the device. Wipe the exterior with a soft, dry cloth. Do not use harsh chemicals or submerge the headset in water. Use a small brush to remove debris from the mesh.
How to replace the ear cushions?
Ear cushions are designed for long-term use and are not user-replaceable. If damaged, contact Trust customer support for more assistance.
Does the headset require batteries?
No, the Trust Lumen 22447 is a wired headset. The LED lights are powered by the USB connection, and the audio is passive via the 3.5mm jack.
Can I use the headset on a mobile phone?
Yes, the 3.5mm connector works with most smartphones and tablets. Note that the microphone may work as well depending on the TRRS configuration. If the phone has a single port, the headset will work for both audio and mic.
What do the controls on the cable do?
The inline controller has a volume wheel and a microphone mute switch. The volume wheel adjusts the overall headphone volume, while the mute switch silences the microphone.
User questions about Lumen 22447 TRUST
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual Lumen 22447 - TRUST and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Lumen 22447 by TRUST.
USER MANUAL Lumen 22447 TRUST
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TRUST
Model : Lumen 22447
Category : Headphones