WD-62825 - Television MITSUBISHI - Free user manual and instructions
Find the device manual for free WD-62825 MITSUBISHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rear Projection DLP Television |
| Brand | Mitsubishi |
| Model | WD-62825 |
| Screen Size | 62 inches (diagonal) |
| Display Resolution | 1920 x 1080 pixels (Full HD) |
| Aspect Ratio | 16:9 |
| Tuner Type | ATSC / NTSC |
| Digital TV Compatibility | Clear QAM |
| HDMI Inputs | 2 x HDMI 1.3 |
| Component Video Inputs | 2 (Y/Pb/Pr) |
| Composite Video Inputs | 2 (AV) |
| S-Video Inputs | 1 |
| PC Input | 1 (15-pin D-sub) |
| Audio Output | Optical digital audio out |
| Speakers | 2 x 15 W with SRS WOW |
| Standby Power Consumption | Less than 1 W |
| Power Consumption (Operating) | 290 W |
| Dimensions (W x H x D) without stand | 58.5 x 40.2 x 18.9 inches |
| Weight without stand | 83.8 lbs (38 kg) |
| Lamp Life | Up to 8000 hours in low power mode |
| Lamp Type | 300W UHP |
| Cleaning Instructions | Use a soft dry cloth; avoid liquid cleaners on the screen; clean vents and cabinet regularly. |
| Safety Instructions | Do not block ventilation slots; install on a stable base; use only approved attachments. |
| Spare Parts Availability | Genuine lamps and accessories available via Mitsubishi service centers. |
| Repairability | Modular design with user-replaceable lamp and easy access to filters. |
Frequently Asked Questions - WD-62825 MITSUBISHI
How do I replace the lamp in my Mitsubishi WD-62825?
To replace the lamp, turn off the TV and unplug it. Wait at least 30 minutes for the lamp to cool. Remove the lamp compartment cover on the rear or side (depending on your model), unscrew the old lamp, and pull it out by the handle. Insert the new lamp securely, tightening the screw. Replace the cover, plug in the TV, and reset the lamp hour timer via the menu under "Lamp Timer" (see manual section 5.2).
My HDMI input shows "No Signal". How do I troubleshoot?
First, verify that the HDMI cable is firmly connected to both the TV and the source device. Try a different port and disable HDMI-CEC on the connected device if it fails. Also, make sure the source is powered on and outputting a supported resolution (up to 1080p). If the issue continues, reset the TV's HDMI inputs via the Input setting menu.
What is the best way to clean the screen?
Use a soft, dry, lint-free cloth to gently wipe the screen in a circular motion. Do not use any chemical cleaners, ammonia, or abrasive materials. For stubborn dirt, slightly dampen the cloth with water. Avoid spraying directly on the screen to prevent dripping behind the bezel.
Does the WD-62825 support 1080p video signals?
Yes, the WD-62825 accepts 1080p signals on all HDMI inputs. It also supports 720p and 1080i. Go to the Signal menu to check the incoming resolution.
How can I connect external speakers or a soundbar?
The TV has optical digital audio output and standard RCA stereo audio outputs. Connect your soundbar or amplifier using an optical cable for digital surround sound, or use the RCA jacks for analog audio. Set the audio output to "Fixed" or "Variable" depending on your preference in the Audio menu.
Why does the picture look too dark or have faded colors?
This is often due to lamp aging. Check the lamp hour counter in the Lamp menu. If it exceeds recommended hours, replace the lamp. Also, verify the picture mode is not in "Energy Save" or "Auto Brightness" which may dim the display. Adjust Brightness and Contrast through the picture settings.
Can I mount this TV on a wall?
The WD-62825 is a rear projection television and is not designed for wall mounting due to its depth and weight. The user manual recommends using the supplied stand or a sturdy TV cabinet. There are no standard VESA mounting holes on the chassis.
My remote control stopped working. How do I check it?
First, make sure no obstacles are blocking the infrared sensor on the TV. Replace the two AA batteries, checking polarity. If it still fails, reset the remote by removing the batteries and pressing each key for a few seconds. Point the remote at a digital camera to see if the IR LED emits light when a button is pressed.
How do I perform a factory reset?
To reset the TV to factory defaults, press MENU, go to "Setup" > "System Reset". Select "All Settings" and confirm. The TV will restart and display the initial setup screen. Note that scheduled recordings and channel lists will be erased.
What does a blinking lamp indicator mean?
The lamp indicator blinks to warn of a lamp failure or temperature issue. A steady red flash pattern may indicate the lamp has reached its end of life. Consult the troubleshooting table in the manual. If the lamp is still working, check ventilation and ensure the filters are clean.
User questions about WD-62825 MITSUBISHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Television in PDF format for free! Find your manual WD-62825 - MITSUBISHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WD-62825 by MITSUBISHI.
USER MANUAL WD-62825 MITSUBISHI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MITSUBISHI
Model : WD-62825
Category : Television