MFC 3360 - Fax BROTHER - Free user manual and instructions
Find the device manual for free MFC 3360 BROTHER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | All-in-One Laser Multifunction Printer |
| Brand | Brother |
| Model | MFC-3360 |
| Category | Fax and Multifunction Device |
| Dimensions (W x D x H) | 425 x 424 x 324 mm (approx.) |
| Weight | 9.5 kg (approx.) |
| Power Supply | AC 220-240V, 50/60Hz |
| Power Consumption | Approx. 550W printing, 30W standby |
| Print Technology | Laser |
| Print Speed | Up to 25 pages per minute (A4) |
| Print Resolution | Up to 600 x 600 dpi |
| Copy Speed | Up to 25 copies per minute |
| Scan Resolution | Up to 600 x 600 dpi |
| Fax Modem Speed | 33.6 kbps |
| Memory | 16 MB |
| Paper Input Capacity | 250-sheet adjustable tray |
| Paper Output Capacity | 100 sheets face-down |
| Connectivity | USB 2.0, parallel port |
| Display | 2-line backlit LCD |
| Duty Cycle | Up to 12,000 pages/month (approximate) |
| Maintenance | Clean scanner glass; replace toner and drum units |
| Safety Certifications | Energy Star, RoHS compliant |
| Consumables | Toner TN-330/TN-340, drum DR-330 |
| Repairability | User-replaceable toner cartridge, drum and fuser |
Frequently Asked Questions - MFC 3360 BROTHER
How do I replace the toner cartridge in the Brother MFC-3360?
Open the front cover, remove the old toner cartridge, unpack the new one, and rock it side to side five times to distribute toner. Then slide it into the drum unit until it clicks, and close the cover. See the toner cartridge guidelines.
How do I set the date and time on the MFC-3360?
Press Menu, select Initial Setup, then Date, and enter the current date. Next, set Time in the same menu. The device uses the clock for fax timestamps.
How do I send a fax?
Place the document face-down on the scanner glass or face-up in the feeder, dial the number, and press Start. The MFC-3360 will transmit the document via the 33.6kbps modem.
How do I clear a paper jam?
Open the rear access cover, gently pull out any jammed paper, and check the paper tray and fuser area. Avoid tearing the paper. For detailed steps, consult the paper jam troubleshooting section.
How do I connect the MFC-3360 to a computer?
Use a USB 2.0 cable to connect the device to the computer. Install the driver from the included CD or Brother support website. The USB connection allows printing, scanning, and PC faxing.
How do I scan a document?
Place the document on the scanner glass, press Scan, select your computer, and choose a resolution. Use the Brother ControlCenter software to adjust settings and save the scanned image.
How do I make a copy?
Place the original on the glass, adjust copy settings (contrast, number of copies) with the copy key, and press Start. The MFC-3360 produces fast, high-quality copies at up to 25 cpm.
What maintenance does the MFC-3360 require?
Regularly clean the scanner glass with a soft, lint-free cloth. Replace the drum unit after approximately 15,000 pages and the toner cartridge when low. Check for loose cables and paper dust.
How do I clean the scanner glass?
Lift the document cover, wipe the glass strip and the white plastic sheet with a dry, soft cloth. Use an isopropyl alcohol wipe if needed, and let it dry before closing. This improves scan quality.
How do I configure the fax for a shared phone line?
Set the receive mode to Manual or TAD (answering device) to avoid conflicts. Connect the device to the contact ID and test by sending a fax. Adjust the number of rings to match your answering machine.
User questions about MFC 3360 BROTHER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fax in PDF format for free! Find your manual MFC 3360 - BROTHER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MFC 3360 by BROTHER.