EME1M1-005-R2 - Motion detector Black Box - Free user manual and instructions
Find the device manual for free EME1M1-005-R2 Black Box in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector |
| Brand | Black Box |
| Model | EME1M1-005-R2 |
| Detection Technology | Passive Infrared (PIR) |
| Detection Range | Up to 12 meters (39 feet) |
| Detection Angle | 90 degrees |
| Power Supply | 12V DC |
| Current Consumption | Less than 20 mA |
| Output Relay | Normally closed/open, 3A @ 30V DC |
| Dimensions | 90 x 60 x 45 mm (3.5 x 2.4 x 1.8 in) |
| Weight | 150 g (5.3 oz) |
| Mounting | Wall mount |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Housing Material | ABS plastic |
| LED Indication | Yes, for alarm status |
| Tamper Protection | Yes, built-in tamper switch |
| Compliance | CE, RoHS |
| Connectivity | Wired terminals |
| Adjustable Sensitivity | Yes |
| Maintenance | Wipe with a dry cloth |
| Repair | Contact manufacturer for certified service |
Frequently Asked Questions - EME1M1-005-R2 Black Box
How do I install the EME1M1-005-R2 motion detector?
Mount the detector on a wall or corner at a height of 2 to 3 meters using the included bracket. Connect the power supply (12V DC) and the alarm output to your security panel. Adjust the sensitivity and detection angle according to your coverage area.
What is the maximum detection range of this detector?
The passive infrared sensor detects motion up to 12 meters (39 feet) with a 90-degree angle of coverage.
Can I use this motion detector outdoors?
No, this detector is designed for indoor use only. Operating temperature ranges from -10°C to 50°C, and the housing is not weatherproof.
How do I connect the output relay to my alarm system?
Use the terminal block to connect the relay contacts. The relay provides a normally closed (NC) or normally open (NO) dry contact rated at 3A @ 30V DC. Ensure the wiring is secure and insulated.
How can I adjust the sensitivity?
Locate the sensitivity potentiometer on the circuit board. Turn it clockwise to increase sensitivity or counterclockwise to decrease it. Test the detection range after adjustment.
What does the LED indicator signify?
The LED lights up when motion is detected, confirming the sensor has triggered. This helps during installation and testing.
What is the tamper protection feature?
The detector includes a tamper switch that triggers an alarm if the housing is opened or the device is removed from its mounting surface, providing protection against sabotage.
How do I clean and maintain the motion detector?
Use a soft, dry cloth to wipe the housing and the lens. Do not use solvents or abrasive cleaners. Check periodically for dust buildup, which can reduce detection performance.
What should I do if the detector does not respond?
First, verify the power supply is connected and the voltage is 12V DC. Check all wiring connections and the relay output. If the issue persists, contact Black Box technical support for further diagnostic assistance.
Is there a warranty for this product?
Black Box provides a standard warranty for this motion detector. Refer to the included warranty card or contact support for details. The device is repairable; however, only authorized technicians should open the unit to avoid damage.
User questions about EME1M1-005-R2 Black Box
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual EME1M1-005-R2 - Black Box and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EME1M1-005-R2 by Black Box.
USER MANUAL EME1M1-005-R2 Black Box
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Black Box
Model : EME1M1-005-R2
Category : Motion detector