IM400 iron - Iron BLACK & DECKER - Free user manual and instructions
Find the device manual for free IM400 iron BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Steam Iron |
| Brand | Black & Decker |
| Model | IM400 |
| Power Consumption | 1200 W |
| Voltage | 120 V, 60 Hz |
| Soleplate | Non-stick coated for smooth gliding |
| Water Tank Capacity | 250 ml |
| Continuous Steam Rate | 15 g/min |
| Spray Function | Yes |
| Self-Cleaning | Yes |
| Anti-Drip | Yes |
| Vertical Steam | Yes, for hanging garments |
| Variable Steam Control | Dial with multiple settings |
| Heat Settings | Fabric-appropriate temperature ranges |
| Cord Length | 2.5 m |
| Weight | 1.1 kg |
| Dimensions (W x L x H) | 11.5 x 27.5 x 13 cm |
| Cord Storage | Yes, with wrap-around heel |
| Filling Method | Water cup included |
| Descaling | Recommended every 2-3 months |
| Safety Features | Thermal fuse protection |
| Warranty | 2-year limited |
Frequently Asked Questions - IM400 iron BLACK & DECKER
How do I use the spray function on the IM400 iron?
Fill the water tank, then press the spray button on the handle. The spray emits a fine mist to dampen stubborn wrinkles. Use it with moderate pressure for best results.
How should I clean the soleplate?
Allow the iron to cool completely. Wipe the soleplate with a soft cloth and a mild cleaning solution. Avoid abrasive pads to prevent surface damage.
Can I use tap water in the IM400?
Yes, tap water is fine for normal use. If you have very hard water, mix it with distilled water in a 1:1 ratio to reduce mineral buildup.
What temperature should I use for cotton?
Set the dial to the cotton or high-heat position (usually 3 or 4 dots). Always test on an inconspicuous area first to avoid scorching.
Why does water leak from the soleplate?
Leakage may occur if the iron is not hot enough or the tank is overfilled. Ensure the temperature is set for steam and do not fill past the MAX line.
How do I store the iron safely?
Empty the water tank, wrap the cord around the heel, and stand the iron upright. Store in a dry place away from direct sunlight.
What does the self-clean function do?
Self-clean flushes out mineral deposits and impurities. Fill the tank to MAX, run the iron on high heat with the self-clean button pressed, and allow steam to escape. This prolongs the iron's lifespan.
Why is my iron not heating up?
Check if the cord is plugged in and the temperature dial is set. If the indicator light stays off, the thermal fuse might have tripped. Contact service in that case.
Can I use the iron vertically for curtains?
Yes, the IM400 supports vertical steam. Hold the iron close to the fabric without touching it, and press the steam burst button to remove wrinkles from hanging items.
How do I replace the power cord?
The cord is not designed for user replacement. For safety, contact Black & Decker support or an authorized service center for repair.
User questions about IM400 iron BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Iron in PDF format for free! Find your manual IM400 iron - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IM400 iron by BLACK & DECKER.
USER MANUAL IM400 iron BLACK & DECKER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BLACK & DECKER
Model : IM400 iron
Category : Iron