IC Intracom

524810 - Adapter / Network Card IC Intracom - Free user manual and instructions

Find the device manual for free 524810 IC Intracom in PDF.

📄 46 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice IC Intracom 524810 - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Gigabit Ethernet PCI Express Network Adapter
Primary Functions Wired network connectivity, high-speed data transfer, auto-negotiation
Interface PCI Express x1
Network Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Data Transfer Rate 10/100/1000 Mbps
Connector Type 1 x RJ45
Duplex Mode Full duplex and half duplex
Auto-Negotiation Supported
Wake-on-LAN Supported
Jumbo Frame Support Up to 9 KB
VLAN Tagging IEEE 802.1Q
Dimensions (W x H x D) 120 mm x 80 mm x 21 mm
Weight 45 g
Power Consumption 2 W maximum
Operating Temperature 0 °C to 40 °C
Storage Temperature -20 °C to 70 °C
Operating Humidity 20% to 80% non-condensing
Supported OS Windows, Linux, macOS
Package Contents Network card, low-profile bracket, quick installation guide
Cleaning and Care Use a dry cloth or compressed air; do not use liquid solvents
Safety Disconnect power before installing; avoid moisture
Repairability and Spare Parts No user-serviceable parts; low-profile bracket available separately

Frequently Asked Questions - 524810 IC Intracom

What operating systems are supported by the 524810?
The 524810 supports Windows 10/11, Linux, and macOS with appropriate drivers. You can download the latest drivers from the IC Intracom support website.
How do I install the 524810 network card?
Power off the computer, open the case, insert the card into a PCIe x1 slot, secure it with the screw, replace the case, boot the PC, and install the driver from the included disk or the website.
Does the 524810 support gigabit speed?
Yes, it supports 10/100/1000 Mbps auto-negotiation, allowing you to reach gigabit performance on compatible networks.
Can I use Wake-on-LAN?
Yes, the card supports Wake-on-LAN. Enable the feature in the BIOS and in the operating system network adapter properties.
What is the maximum Ethernet cable length?
For gigabit speeds, the maximum cable length is 100 meters over Cat5e or Cat6 twisted pair cable.
Does it support jumbo frames?
Yes, the card supports jumbo frames up to 9 KB, which can improve performance for large file transfers.
How do I check if the network card is working?
After installation, check the link/activity LEDs on the bracket. A green link LED indicates a valid connection, and the activity LED flashes with data traffic.
Is the card compatible with small form factor cases?
Yes, the card comes with a low-profile bracket, making it suitable for installation in slim desktop cases.
Does the 524810 require a separate power cable?
No, the card is powered entirely through the PCIe slot, so no external power connector is needed.
How do I clean the network card?
Turn off and unplug the PC, then gently use compressed air to remove dust from the card's surface and connectors. Avoid liquids and abrasive materials.

User questions about 524810 IC Intracom

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Adapter / Network Card in PDF format for free! Find your manual 524810 - IC Intracom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 524810 by IC Intracom.

USER MANUAL 524810 IC Intracom

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : IC Intracom

Model : 524810

Category : Adapter / Network Card