SNV-3120 - Security Camera SAMSUNG - Free user manual and instructions
Find the device manual for free SNV-3120 SAMSUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Vandal-resistant Fixed Dome Security Camera |
| Image Sensor | 1/3" CMOS |
| Resolution | 1.3 Megapixel (1280 x 1024) |
| Lens Type | 2.8mm fixed lens |
| Field of View | 113° |
| Minimum Illumination | 0.1 Lux (color), 0 Lux with IR on |
| Infrared Range | Up to 15 meters |
| Video Compression | H.264, MPEG-4, MJPEG |
| Maximum Frame Rate | 30 fps at 1280 x 1024 |
| Network Interface | 10/100 Base-T Ethernet (RJ45) |
| Power Supply | PoE 802.3af or 12V DC |
| Dimensions (Ø x H) | 130 x 98 mm |
| Weight | 600 g |
| Enclosure / Rating | Vandal-resistant, IP66 weatherproof, IK10 |
| Operating Temperature | -10°C to +50°C |
| Storage | Built-in microSD/SDHC slot (optional) |
| Security Features | Password protection, IP address filtering, HTTPS encryption |
| Motion Detection | Built-in motion detection with 3D noise filter |
| Cleaning & Maintenance | Wipe dome gently with dry microfiber cloth; avoid solvents |
| Included Accessories | Mounting bracket, drilling template, screw kit, user manual |
| Certifications | CE, FCC, RoHS |
Frequently Asked Questions - SNV-3120 SAMSUNG
How do I factory reset the Samsung SNV-3120 camera?
To reset the camera to factory defaults, press and hold the reset button located on the camera housing for about 5 seconds while power is applied. The camera will reboot and all settings will return to the original factory configuration. For detailed instructions, refer to the troubleshooting section of the manual.
Does the SNV-3120 support Power over Ethernet (PoE)?
Yes, the SNV-3120 supports IEEE 802.3af PoE, allowing both power and data transmission over a single Ethernet cable. It is also compatible with 12V DC power when PoE is not available.
What is the maximum resolution and frame rate of this camera?
The camera provides a maximum resolution of 1280 x 1024 (1.3 Megapixel) at up to 30 frames per second. You can adjust the resolution and frame rate through the web interface to balance bandwidth and image quality.
How can I access the camera remotely over the internet?
Connect the camera to your network, then configure port forwarding on your router or use the camera's UPnP feature. You can access the live stream by entering the camera's IP address in a web browser or via the vendor's mobile app. For security, set a strong password and use HTTPS.
Is the SNV-3120 suitable for outdoor installation?
Yes, the camera has an IP66 weatherproof rating, meaning it is dust-tight and protected against heavy rain. It also features an IK10 vandal-resistant housing, making it suitable for both indoor and outdoor installations in harsh environments.
What is the best way to clean the camera lens and dome?
To clean the dome, gently wipe with a soft dry microfiber cloth to remove dust and fingerprints. If stubborn dirt remains, use a slightly damp cloth with water or a mild lens cleaner, then dry immediately. Do not use abrasive cleaners or solvents, as they can damage the coating.
What is the infrared (IR) range and how does it affect night vision?
The SNV-3120 is equipped with a built-in IR LED array providing a distance of up to 15 meters in complete darkness. The camera automatically switches to black-and-white mode when light levels fall below 0.1 Lux, and the IR LEDs illuminate the scene for clear 24/7 surveillance.
Does the camera support motion detection and alerts?
Yes, the camera features built-in motion detection that can trigger recording, email alerts, or FTP uploads. You can define multiple motion detection zones and set sensitivity levels through the web interface to minimize false alarms.
How do I install a microSD card in the SNV-3120?
Power off the camera, then locate the microSD card slot under the dome cover. Insert a microSD or SDHC card (up to 32GB) into the slot until it clicks. Replace the dome cover and power on. Then format the card via the camera's web interface before use for local recording.
What power supply options are available for this camera?
The camera can be powered via PoE (802.3af) from a PoE switch or injector, or via a 12V DC power adapter (connected to the 2-pin terminal). PoE is recommended for simpler cabling and backup power capability if paired with a UPS.
User questions about SNV-3120 SAMSUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual SNV-3120 - SAMSUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SNV-3120 by SAMSUNG.
USER MANUAL SNV-3120 SAMSUNG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SAMSUNG
Model : SNV-3120
Category : Security Camera