SP920P - Video projector BENQ - Free user manual and instructions
Find the device manual for free SP920P BENQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video projector |
| Brand | BenQ |
| Model | SP920P |
| Display Technology | DLP (Digital Light Processing) |
| Native Resolution | 1024 x 768 (XGA) |
| Brightness | 4000 ANSI Lumens |
| Contrast Ratio | 2000:1 (typical) |
| Lamp Type | Dual lamps (2 x 300W) |
| Lamp Life | Up to 2000 hours (normal mode) |
| Keystone Correction | Vertical: +/- 30 degrees |
| Input Connectors | VGA, DVI-D, S-Video, Composite, Component, RS-232, USB |
| Weight | Approximately 8.6 kg (19 lbs) |
| Dimensions (W x H x D) | 480 x 166 x 390 mm (18.9 x 6.5 x 15.4 inches) |
| Power Consumption | Typical 490W (standby < 1W) |
| Noise Level | Approximately 32 dB (eco mode) |
| Projection Lens | Manual zoom and focus, F=2.45-2.77, f=24.1-36.1 mm |
| Supported Aspect Ratios | 4:3, 16:9 |
| Maintenance & Cleaning | Clean the filter every 500 hours; replace lamp when indicator alerts |
| Safety Features | Kensington lock, password protection, overheat protection |
| Spare Parts & Repairability | Replacement lamps, filters, and remote control available at BenQ service centers |
| General Information | Designed for professional and educational use; supports 24/7 operation |
Frequently Asked Questions - SP920P BENQ
How do I connect my laptop to the BenQ SP920P projector?
Use a VGA cable to connect your laptop's VGA output to the projector's VGA input. Ensure the projector is set to the correct input source using the Source button on the remote or control panel. You may also use a DVI or HDMI connection with an adapter.
For the correct image display, set your laptop's screen resolution to 1024x768 or an aspect ratio that matches the projector's native resolution.
For the correct image display, set your laptop's screen resolution to 1024x768 or an aspect ratio that matches the projector's native resolution.
What is the recommended lamp replacement interval?
The lamp is rated for up to 2000 hours in normal mode. When the lamp indicator turns amber or red, it's time to replace the lamp. Always allow the projector to cool down for at least 45 minutes before opening the lamp compartment. Use only genuine BenQ replacement lamps for optimal performance and safety.
Why does the projector not display any image after powering on?
Check that the power cable is properly connected and the LCD lamp is lit. Verify that the input source matches the connected device. Also, ensure the lens cap is removed and the projector is not in standby mode. If the problem persists, consult the troubleshooting section of the user manual for specific error codes.
Can I use the projector outdoors?
Yes, but keep it in a dry, shaded area away from direct sunlight. Use a suitable screen and adjust the brightness settings. Note that ambient light reduces the image quality; the 4000 ANSI lumens provide sufficient brightness for moderate ambient light.
What maintenance is required for the air filter?
Clean the air filter every 500 hours of operation to prevent overheating. Remove the filter cover, wash the filter with warm water, dry it thoroughly, and replace it. Never operate the projector without the filter installed.
Does the BenQ SP920P support 3D content?
The SP920P is primarily a data projector and does not natively support 3D projection. It is optimized for 2D presentations, video, and computer graphics.
How can I adjust the projected image size?
Use the zoom ring on the lens to change the image size without moving the projector. To focus, rotate the focus ring until the image is sharp. The projector should be placed at a distance that suits the desired screen size; refer to the projection distance table in the manual.
Is the projector compatible with Mac computers?
Yes, the SP920P works with Mac systems that support VGA or DVI output. You may need a Mini DisplayPort to VGA adapter. Use the appropriate cable and select the correct input source. The projector is compatible with most operating systems.
What is the maximum projection distance?
The projection distance depends on the desired image size and the lens zoom. With the lens set to wide angle (f=24.1mm), you can project a 100-inch image from approximately 2.5 meters. The maximum distance for larger images is limited by the brightness and ambient light.
How do I perform a factory reset on the projector?
Press the Menu button on the control panel or remote, go to System Setup, and select Advanced. Choose 'Factory Reset' or 'Reset Settings' and confirm. This will restore all factory defaults, including image, audio, and network settings. Note that the user password may also be reset.
User questions about SP920P BENQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual SP920P - BENQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SP920P by BENQ.
USER MANUAL SP920P BENQ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BENQ
Model : SP920P
Category : Video projector