PDWM2950 - Microphone Pyle - Free user manual and instructions
Find the device manual for free PDWM2950 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Wireless Microphone System |
| Brand | Pyle |
| Model | PDWM2950 |
| Number of Microphones | 2 Handheld Microphones |
| Microphone Type | Dynamic Handheld |
| Transmission Technology | UHF Radio Frequency |
| Operating Frequency Band | 540-590 MHz |
| Wireless Range | Up to 100 meters (line of sight) |
| Number of Channels | 16 Selectable Frequencies |
| Frequency Response | 60 Hz - 15 kHz |
| Signal-to-Noise Ratio | Greater than 80 dB |
| Distortion | Less than 1% |
| Receiver Display | LCD Digital Display |
| Receiver Power Supply | DC 12V AC Adapter (included) |
| Microphone Power Supply | 2 AA Batteries per Microphone |
| Output Connectors | XLR and 1/4" Jack |
| Dimensions (Receiver) | 420 x 150 x 40 mm |
| Total System Weight | Approximately 1.5 kg |
| Mounting | 19" Rackmountable, 1U |
| Included Accessories | 2 Handheld Microphones, Receiver, AC Adapter, Rackmount Ears |
| Maintenance | Wipe with a dry, soft cloth |
| Safety Precautions | Keep away from moisture and extreme temperatures |
| Spare Parts & Repairability | Contact Pyle authorized service center |
Frequently Asked Questions - PDWM2950 Pyle
How do I set up the PDWM2950 wireless microphone system?
Connect the receiver to a mixer or amplifier using the XLR or 1/4" outputs. Plug in the AC adapter. Insert 2 AA batteries into each microphone, then turn on the receiver and microphones. Use the LCD display to select a clear frequency.
What batteries are required for the handheld microphones?
Each handheld microphone requires 2 AA batteries. Standard alkaline batteries are recommended for best performance.
How do I select a frequency to avoid interference?
Use the channel selector on the receiver to scan for a clear frequency. Ensure both microphones are set to different channels when used simultaneously to avoid signal overlap.
I am getting feedback from the speakers. How can I reduce it?
Position the microphones away from the speakers, lower the volume levels, and avoid pointing the microphones directly at the monitor speakers. Adjusting the equalizer settings can also help minimize feedback.
Can I connect the receiver to a mixer or amplifier?
Yes, the receiver is equipped with both XLR and 1/4" output connectors, allowing easy connection to mixers, amplifiers, or other audio equipment.
How far can the microphones work from the receiver?
The wireless range is up to 100 meters (330 feet) in open line-of-sight conditions. Walls and other obstructions may reduce this range.
What should I do if there is no sound from the microphones?
Check that both microphones and the receiver are powered on, batteries are fresh, and the output cables are properly connected. Also verify that the frequency on each microphone matches the receiver channel.
How do I clean and maintain the system?
Wipe the receiver and microphones with a dry, soft cloth. Avoid using abrasive cleaners or moisture. Store the equipment in a cool, dry place when not in use.
Can I use additional microphones with this system?
The PDWM2950 is designed for two microphones. If you need more microphones, consider using multiple PDWM2950 systems or a model with more channels.
Is the receiver rack mountable?
Yes, the receiver is 19" rackmountable and includes rackmount ears for installation in a standard equipment rack, occupying 1U of space.
User questions about PDWM2950 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual PDWM2950 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PDWM2950 by Pyle.